Thermal Fuses

What are thermal fuses?

Thermal fuses, also called thermal cutoffs, are a safety device used in electrical circuits to provide protection against appliances overheating. Thermal fuses are normally supplied in an axial or radial package, although some thermal fuses are now available as a chip.

How do thermal fuses work?

Thermal fuses work in a similar way to electrical cartridge fuses; when the conditions exceed a certain limit, the circuit will be broken. For thermal fuses, the limit is based on temperature. Thermal fuses typically contain a small pellet within them or have a thin piece of wire which melts at a certain temperature. When the pellet or piece of wire melts, the circuit breaks. This is called 'blowing out' or 'burning out'.

Single-use thermal fuses and resettable thermal fuses

Most thermal fuses are single-use and non-resettable. Once the pellet or piece or wire has melted, the thermal fuse will need replacing before you can operate your appliance again. Resettable fuses are available but tend to have a higher upfront cost than single-use counterparts. For resettable fuses, when the wax pellet within melts, the circuit is broken. However, as the appliance cools, the wax pellet will cool and solidify. This will complete the circuit again and your appliance can be used.

What are thermal fuses used for?

Thermal fuses are used to protect appliances from overheating and can be found in domestic and industrial applications. They are a safety device that helps to prevent fires. For example, thermal fuses can be found in hairdryers, tumble dryers and coffee machines.

What is the difference between functioning temperature and holding temperature?

All thermal fuses have a holding temperature rating and functioning temperature rating. These are key measurements to consider when choosing the right thermal fuse for your application. The holding temperature, normally measured in Celsius, defines what temperature the fuse can operate at continuously without blowing. This is the limit of the safe temperature range for the fuse. The functioning temperature is the lowest temperature rating (also in Celsius) at which the thermal fuse will blow and the circuit will break.

...
Read more Read less

Filters

Viewing 1 - 20 of 68 products
Results per page
Description Price Functioning Temperature Holding Temperature Maximum Current Voltage Rating Lead Orientation Series Body Diameter Body Height Body Length Body Width Wire Diameter Wire Length
RS Stock No. 176-9384
Mfr. Part No.SM 126 A0
BrandLimitor
kr 5,98
Each (In a Pack of 5)
Units
+131°C +96°C 2 A 250V ac Axial - 2.5mm 9mm - - 0.6mm 38mm
RS Stock No. 797-6064
Mfr. Part No.SF 094 R
BrandLimitor
kr 9,321
Each (In a Pack of 10)
Units
+99°C +84°C 15 A 250V ac Axial - 4mm 8.5mm - - 1mm 18.5mm
RS Stock No. 116-114
Mfr. Part No.SM 092 A0 2A
BrandLimitor
kr 10,986
Each (In a Pack of 5)
Units
+97°C +62°C 2 A 250V ac Axial - 2.5mm 9mm - - 0.6mm 38mm
RS Stock No. 111-7300
Mfr. Part No.STC-183
BrandSelco
kr 15,335
Each (In a Pack of 10)
Units
+84°C +60°C 10 A 250V ac Axial STC Series 4mm 10.5mm - - 1.024mm 35mm
RS Stock No. 176-9160
Mfr. Part No.P82 100 05100
BrandLimitor
kr 50,44
Each
Units
+100°C - 2.5 A 250V ac Radial - - 8mm 17.5mm 4mm 0.51mm 100mm
RS Stock No. 797-6030
Mfr. Part No.SF 229 R
BrandLimitor
kr 9,321
Each (In a Pack of 10)
Units
+229°C +200°C 15 A 250V ac Axial - 4mm 8.5mm - - 1mm 18.5mm
RS Stock No. 797-6055
Mfr. Part No.SF 129 R
BrandLimitor
kr 9,321
Each (In a Pack of 10)
Units
+133°C +118°C 15 A 250V ac Axial - 4mm 8.5mm - - 1mm 18.5mm
RS Stock No. 204-7483
Mfr. Part No.Q82 A 140 05 100
BrandLimitor
kr 44,81
Each
Units
+140°C - 2.5 A 250V ac Radial - - 8mm 17.5mm 4mm 0.51mm 100mm
RS Stock No. 797-6052
Mfr. Part No.SF 167 R
BrandLimitor
kr 8,563
Each (In a Pack of 10)
Units
+167°C +153°C 15 A 250V ac Axial - 4mm 8.5mm - - 1mm 18.5mm
RS Stock No. 797-6042
Mfr. Part No.SF 119 R
BrandLimitor
kr 7,478
Each (In a Pack of 10)
Units
+121°C +106°C 15 A 250V ac Axial - 4mm 8.5mm - - 1mm 18.5mm
RS Stock No. 204-7477
Mfr. Part No.Q82 A 130 05 100
BrandLimitor
kr 57,13
Each
Units
+130°C - 2.5 A 250V ac Radial - - 8mm 17.5mm 4mm 0.51mm 100mm
RS Stock No. 176-9211
Mfr. Part No.P82 145 05100
BrandLimitor
kr 51,15
Each
Units
+145°C - 2.5 A 250V ac Radial - - 8mm 17.5mm 4mm 0.51mm 100mm
RS Stock No. 176-9176
Mfr. Part No.P82 105 05100
BrandLimitor
kr 51,15
Each
Units
+105°C - 2.5 A 250V ac Radial - - 8mm 17.5mm 4mm 0.51mm 100mm
RS Stock No. 176-9182
Mfr. Part No.P82 110 05100
BrandLimitor
kr 50,45
Each
Units
+110°C - 2.5 A 250V ac Radial - - 8mm 17.5mm 4mm 0.51mm 100mm
RS Stock No. 712-7326
Mfr. Part No.EYP05BE115
BrandPanasonic
kr 3,25
Each (In a Pack of 10)
Units
+115°C +95°C 3 A 250V ac Axial - 1.8mm 5mm - - 0.53mm 38mm
RS Stock No. 111-7805
Mfr. Part No.SWTC-262-3535
BrandSelco
kr 16,322
Each (In a Pack of 10)
Units
+128°C +103°C 10 A 250V ac Axial SWTC Series 4mm 10mm - - 1mm 35mm
RS Stock No. 111-7813
Mfr. Part No.SWTC-464-3535
BrandSelco
kr 16,322
Each (In a Pack of 10)
Units
+240°C +193°C 10 A 250V ac Axial SWTC Series 4mm 10mm - - 1mm 35mm
RS Stock No. 111-7095
Mfr. Part No.SWTC-183-3535
BrandSelco
kr 16,322
Each (In a Pack of 10)
Units
+84°C +57°C 10 A 250V ac Axial SWTC Series 4mm 10mm - - 1mm 35mm
RS Stock No. 204-7427
Mfr. Part No.Q82 A 80 05 100
BrandLimitor
kr 51,92
Each
Units
+80°C - 2.5 A 250V ac Radial - - 8mm 17.5mm 4mm 0.51mm 100mm
RS Stock No. 195-8754
Mfr. Part No.NIS6350MT2TXG
kr 4,734
Each (On a Reel of 3000)
Units
- - 3 A 5V - NIS6350 - 0.75mm 3.1mm 3.1mm - -
Related Products
Low let through current. Low quenching time. Low ...
Description:
Low let through current. Low quenching time. Low quenching I²t value. Low excess voltage value. Low thermal load on fuse and holder. Breaking capacity 50kA at 500Vac. Suitable for 3-phase applications.
Low let through current. Low quenching time. Low ...
Description:
Low let through current. Low quenching time. Low quenching I²t value. Low excess voltage value. Low thermal load on fuse and holder. Breaking capacity 50kA at 500Vac. Suitable for 3-phase applications.
Neozed fuse links from Mersen limit and cut ...
Description:
Neozed fuse links from Mersen limit and cut off unacceptable over currents and short circuit currents up to their nominal breaking capacity. Constructed from an insulated body these fuses are suitable for high mechanical and thermal impacts. Typical applications for ...
Professional range of Schurter bottle fuses from the ...
Description:
Professional range of Schurter bottle fuses from the DT series. The fuses are available in a variety of current ranges. Mounting Style - Holder. Termination Style - Cartridge. Various colours available. Operating class gGCharacteristic: quick-acting.