Indicator Lampholders

Indicator lampholders are support indicator lights within a lighting fixture and link them to the electrical circuit. These holders or sockets hold the bulbs and enable electrical contact to provide the bulbs with power to switch on, switch off or flash at pre-determined intervals. They also allow the lights to be easily removed, switched out or replaced.


What are indicator lampholders used for?

Indicator lampholders are most commonly found within the automotive industry, where they are used to secure the bulbs of brake lights, turning signal lights, warning gauge lights and ignition status lights.

In the industrial and manufacturing sectors, indicator lampholders are used with equipment or machinery status indicator or warning lights. They are an integral part of the safety and emergency measures within plants and factories.

Types of indicator lampholders

Indicator lampholders are categorised in terms of their different attributes, including:

  • Mounting types, such as PCB (printed circuit board) or panel mount.
  • Termination types, such as soldered, wire lead or screwed.
  • Base formats, such as bayonet, screw in, candelabra or wedged.

...
Read more Read less

Filters

Viewing 1 - 20 of 93 products
Results per page
Description Price Lampholder Type Lamp Type Lamp Base Termination Type Diameter Length Lamp Size Panel Hole Diameter Panel Thickness Mounting Type Power Rating Series Voltage Rating
RS Stock No. 811-642
BrandRS PRO
kr 11,346
Each (In a Pack of 5)
Units
PCB Mount - Wedge PCB Pin 10mm 14.5 mm T3 1/4 - - - - - -
RS Stock No. 589-783
BrandRS PRO
kr 12,918
Each (In a Pack of 5)
Units
Panel Mount - BA9 - 17.7mm 19 mm - 14.5mm - Panel Mount - PE12 150 V
RS Stock No. 811-664
BrandRS PRO
kr 9,316
Each (In a Pack of 5)
Units
PCB Mount - Wedge - - 12 mm - - - - - - -
RS Stock No. 206-536
BrandRS PRO
kr 4,288
Each (In a Pack of 5)
Units
- LED BA9s, E10 - 10mm 42 mm 10 mm - - - - - -
RS Stock No. 210-793
BrandRS PRO
kr 5,486
Each (In a Pack of 5)
Units
- LED - - 11mm 21 mm - - - - - - -
RS Stock No. 438-9515
BrandRS PRO
kr 47,26
Each
Units
- - BA9 Solder Tag 10.3mm 20 mm - - - - - - -
RS Stock No. 171-2596
Mfr. Part No.OR1206
BrandOrbitec
kr 7,226
Each (In a Pack of 10)
Units
PCB Mount - BA9s PCB Pin - - - - - PCB Mount - 0664 -
RS Stock No. 171-2580
Mfr. Part No.OR1204
BrandOrbitec
kr 5,474
Each (In a Pack of 10)
Units
PCB Mount - E10 PCB Pin - - - - - PCB Mount - 0666 -
RS Stock No. 715-4044
Mfr. Part No.2948-6G
kr 9,89
Each (In a Pack of 5)
Units
- - - - 11.5mm - - - - - - - -
RS Stock No. 237-0496
Mfr. Part No.A104800AAB
kr 20,84
Each
Units
Panel Mount LED Screw In Wire Leads 9.5mm 14.5 mm 5 mm 8mm 6.3mm - - - -
RS Stock No. 141-4006
Mfr. Part No.44-10062-0313
BrandVogt
kr 6,53
Each
Units
PCB Mount - E10 - - - - - - - - - -
RS Stock No. 890-4969
Mfr. Part No.125-1310-11-103
BrandDialight
kr 184,98
Each
Units
- - Miniature Bayonet Screw 15.9mm 31.4 mm T1 3/4 - - Panel Mount - 125 2 → 120 V
RS Stock No. 168-3956
Mfr. Part No.2948-6G
kr 7,308
Each (In a Box of 100)
Units
- - - - 11.5mm - - - - - - - -
RS Stock No. 335-971
Mfr. Part No.2919
kr 4,516
Each (In a Pack of 5)
Units
PCB Mount LED Wedge Solder Tab 20mm 16.5 mm T3 1/4 16mm 1.6mm - - - -
RS Stock No. 565-147
Mfr. Part No.T0063AOFAD
kr 38,59
Each
Units
Panel Mount - - Tabbed 14.7mm - - 12.7mm 9.6mm - - - -
RS Stock No. 565-153
Mfr. Part No.T0063AOFAA
kr 38,59
Each
Units
Panel Mount - - Tabbed 14.7mm - - 12.7mm 9.6mm - - - -
RS Stock No. 890-5079
Mfr. Part No.177-8430-09-503
BrandDialight
kr 98,19
Each
Units
- - Midget Flange Solder - 15.9 mm T1 3/4 - - Panel Mount - 177 -
RS Stock No. 835-7165
Mfr. Part No.HW1P-1FQ0-W
BrandIdec
kr 117,66
Each
Units
Panel Mount LED - Screw 29mm 51.7 mm - 22.3mm 0.8 → 6mm - - - -
RS Stock No. 561-707
Mfr. Part No.TMU/240/4
BrandTranilamp
kr 137,02
Each
Units
Panel Mount - Screw In Cable Clamp 35mm 62 mm - - - Panel Mount - TMU -
RS Stock No. 213-4717
Mfr. Part No.102RSJ00000000
BrandSloan
kr 171,35
Each
Units
Panel Mount LED Midget Flange Solder Tag 8.2mm - - - - - - - -
Related Products
Transformer lampholders designed to provide an output for ...
Description:
Transformer lampholders designed to provide an output for a 6 V MES/MBC filament lamp which is isolated from the mains supply. This ensures greater safety/longer life than a mains filament lamp and superior illumination to a neon lamp.,These units are ...
Supplied complete with adaptors to enable either T1 ...
Description:
Supplied complete with adaptors to enable either T1 LES or T1 Miniature Flange lamp to be used.,White glass-loaded nylon body.,Polycarbonate lens provides a uniformly illuminated area. The chrome-plated bezel is connected to one side of the lamp but is fully ...
A range of lamp holders and sockets from ...
Description:
A range of lamp holders and sockets from JKL Components, designed for automotive-type LED lamps. They are suitable for use in replacement LED lamp applications. This range of sockets include; wedge based, bi-pin, G-4 and screw based. Available in PCB ...
877 Series,The nickel plated brass body is supplied ...
Description:
877 Series,The nickel plated brass body is supplied with a solder tag, fixing nut and washer. Electrical connections are made via two insulated solder terminals.The caps construction is a nickel plated brass screw with polycarbonate transparent fresnel lens. The lens ...