Indicator Lampholders

Indicator lampholders are support indicator lights within a lighting fixture and link them to the electrical circuit. These holders or sockets hold the bulbs and enable electrical contact to provide the bulbs with power to switch on, switch off or flash at pre-determined intervals. They also allow the lights to be easily removed, switched out or replaced.


What are indicator lampholders used for?

Indicator lampholders are most commonly found within the automotive industry, where they are used to secure the bulbs of brake lights, turning signal lights, warning gauge lights and ignition status lights.

In the industrial and manufacturing sectors, indicator lampholders are used with equipment or machinery status indicator or warning lights. They are an integral part of the safety and emergency measures within plants and factories.

Types of indicator lampholders

Indicator lampholders are categorised in terms of their different attributes, including:

  • Mounting types, such as PCB (printed circuit board) or panel mount.
  • Termination types, such as soldered, wire lead or screwed.
  • Base formats, such as bayonet, screw in, candelabra or wedged.

...
Read more Read less

Filters

Viewing 21 - 40 of 96 products
Results per page
Description Price Lampholder Type Lamp Type Lamp Base Termination Type Diameter Length Lamp Size Panel Hole Diameter Panel Thickness Mounting Type Power Rating Series Voltage Rating
RS Stock No. 890-5079
Mfr. Part No.177-8430-09-503
BrandDialight
kr 98,19
Each
Units
- - Midget Flange Solder - 15.9 mm T1 3/4 - - Panel Mount - 177 -
RS Stock No. 561-707
Mfr. Part No.TMU/240/4
BrandTranilamp
kr 137,02
Each
Units
Panel Mount - Screw In Cable Clamp 35mm 62 mm - - - Panel Mount - TMU -
RS Stock No. 890-4837
Mfr. Part No.081-1310-01-303
BrandDialight
kr 122,89
Each
Units
- - Miniature Bayonet Screw - 46 mm T3 1/4 - - Panel Mount 75W 081 2 → 120 V
RS Stock No. 890-6785
Mfr. Part No.508-8738-504
BrandDialight
kr 95,88
Each
Units
Datalamp Holder - - Turret 7.9mm 21.5 mm - - - Panel Mount - 508 -
RS Stock No. 237-0531
Mfr. Part No.A1048OAAAD
kr 36,19
Each
Units
Panel Mount LED Screw In Wire Leads 9.5mm 15.5 mm 5 mm 8mm 5.5mm - - - -
RS Stock No. 835-7183
Mfr. Part No.HA9Z-AH
BrandIdec
kr 8,37
Each
Units
Panel Mount LED - Solder Tab - - - 16.2mm 0.5 → 6mm - - - -
RS Stock No. 213-4846
Mfr. Part No.877000KA100000
BrandSloan
kr 153,77
Each
Units
Panel Mount LED Wedge - 11.2mm - - - - - - - -
RS Stock No. 890-4938
Mfr. Part No.125-0410-11-103
BrandDialight
kr 153,46
Each
Units
- - Miniature Bayonet Solder - 31.2 mm T1 3/4 - - Panel Mount - 125 2 → 120 V
RS Stock No. 890-4815
Mfr. Part No.081-0410-01-303
BrandDialight
kr 136,50
Each
Units
- - Miniature Bayonet Solder 20.6mm 46 mm T3 1/4 - - Panel Mount 75W 081 2 → 120 V
RS Stock No. 473-0159
Mfr. Part No.095-0410-09-303
BrandDialight
kr 190,72
Each
Units
- - - - - - - - - - - - -
RS Stock No. 237-0547
Mfr. Part No.A105000AAB
kr 20,93
Each
Units
Panel Mount LED Screw In Wire Leads 10mm 16.9 mm 5 mm 8mm 7mm - - - -
RS Stock No. 890-5174
Mfr. Part No.250-7538-14-504
BrandDialight
kr 81,96
Each
Units
Datalamp Holder - - Solder Cup 7.9mm 31 mm - - - Panel Mount - 250 -
RS Stock No. 890-4871
Mfr. Part No.101-3830-09-203
BrandDialight
kr 174,39
Each
Units
- - Midget Flange Solder - 21.4 mm T1 3/4 - - Panel Mount - 101 1.35 → 28 V
RS Stock No. 237-0575
Mfr. Part No.A1050OAAAD
kr 32,00
Each
Units
Panel Mount LED Screw In Wire Leads 10mm 17.9 mm 5 mm 8mm 7mm - - - -
RS Stock No. 890-5045
Mfr. Part No.162-8430-0931-502
BrandDialight
kr 155,55
Each
Units
- - Midget Flange Solder - 20.6 mm T1 3/4 - - Panel Mount - 162 -
RS Stock No. 705-9920
Mfr. Part No.2910F-42
kr 4,157
Each (In a Pack of 10)
Units
- - - - - - - - - - - - -
RS Stock No. 890-5183
Mfr. Part No.250-8738-14-504
BrandDialight
kr 76,41
Each
Units
Datalamp Holder - - Turret 7.9mm 31 mm - - - Panel Mount - 250 -
RS Stock No. 565-125
Mfr. Part No.T0063AOFAC
kr 38,59
Each
Units
Panel Mount - - Tabbed 14.7mm - - 12.7mm 9.6mm - - - -
RS Stock No. 890-4862
Mfr. Part No.101-3830-09-201
BrandDialight
kr 100,70
Each
Units
- - Midget Flange Solder - 21.4 mm T1 3/4 - - Panel Mount - 101 1.35 → 28 V
RS Stock No. 237-0480
Mfr. Part No.A104700AAC
kr 23,39
Each
Units
Panel Mount LED - Wire Leads 7.6mm 13.9 mm 3 mm 6.3mm 6.3mm - - - -
Related Products
Transformer lampholders designed to provide an output for ...
Description:
Transformer lampholders designed to provide an output for a 6 V MES/MBC filament lamp which is isolated from the mains supply. This ensures greater safety/longer life than a mains filament lamp and superior illumination to a neon lamp.,These units are ...
Supplied complete with adaptors to enable either T1 ...
Description:
Supplied complete with adaptors to enable either T1 LES or T1 Miniature Flange lamp to be used.,White glass-loaded nylon body.,Polycarbonate lens provides a uniformly illuminated area. The chrome-plated bezel is connected to one side of the lamp but is fully ...
A range of lamp holders and sockets from ...
Description:
A range of lamp holders and sockets from JKL Components, designed for automotive-type LED lamps. They are suitable for use in replacement LED lamp applications. This range of sockets include; wedge based, bi-pin, G-4 and screw based. Available in PCB ...
877 Series,The nickel plated brass body is supplied ...
Description:
877 Series,The nickel plated brass body is supplied with a solder tag, fixing nut and washer. Electrical connections are made via two insulated solder terminals.The caps construction is a nickel plated brass screw with polycarbonate transparent fresnel lens. The lens ...