Ceiling Lights

A ceiling light is an electrical fitting containing a lamp or light bulb to provide an artificial light source in a room. Ensuring a workplace has adequate illumination is essential for employee health and safety. Substandard or insufficient lighting can lead to various complaints including eye-strain, headaches and fatigue. On the opposite end of the scale, too much light can also cause the same problems. Both can result in quality issues, low productivity and sometimes accidents can occur.


What ceiling light is best for me?


There are various types of ceiling fixture available, choosing the best one for an installation depends on a few key factors.


  • Natural light: Make the best use of existing natural light. Ensure that all windows and skylights are kept clean to allow as much natural light is utilised.

  • Application: Make sure that the correct type of ceiling lighting is installed for the job at hand. An office environment requires different lighting to a clothing factory containing sewing machines and fabric matching tables.

  • Positioning: Care must be taken when installing ceiling lighting. The correct positioning of lighting ensures that employees can safely carry out their daily tasks and not put themselves under any unnecessary strains.

  • Environment: Must ceiling light be Anti-corrosive or IP44 rated or above.

Whether you are installing office lighting, garage lighting, LED or fluorescent, industrial ceiling lights are the most likely. Some additional points to consider are;


Mounting type


  • Recessed or flush ceiling light: Enables the lamp to be mounted flush into the ceiling.

  • Surface mount: A simple way of fixing single or twin batten fluorescent or LED fixtures to the ceiling.

  • Pendant: A type of fitting that suspends the lamp a short distance from the ceiling.

  • Dimmable: Must the lighting be dimmable? If so extra ballasts and switching components must be used.

  • Diffusers: Used to spread and soften the light.

Colour Temperature


Colour temperature refers to a scale that measures the type of colour or hue that a lamp emits. The colour temperature scale is measured in Kelvins (K). The higher the K number the cooler the lamp. The lower the K number the warmer the lamp.


  • 2500K Extra warm white.

  • 2700K Warm white.

  • 3000K Warm white / White.

  • 3500K White.

  • 4000K Cool white.

  • 6500K Daylight.

...
Read more Read less

Filters

Viewing 1 - 20 of 234 products
Results per page
Description Price Type Length Width Depth Wattage Number of Lamps Colour Tone Lamp Type Colour Temperature Lamp Size Life Hours Colour Reference Voltage Rating Anti-corrosive
RS Stock No. 739-3185
Mfr. Part No.SURF258HF
kr 1 026,17
Each
Units
Surface Mount 1.52 m 295 mm 80 mm 58 W 2 - Fluorescent - T8 - - 230 V -
RS Stock No. 122-3578
Mfr. Part No.4058075079939
BrandLEDVANCE
kr 812,49
Each
Units
Batten 1.5 m 95 mm 78 mm 30 W 1 Cool White LED 4000K - 50000h - 230 V -
RS Stock No. 122-3580
Mfr. Part No.4058075079953
BrandLEDVANCE
kr 1 080,66
Each
Units
Batten 1.5 m 95 mm 78 mm 55 W 1 Cool White LED 4000K - 50000h - 230 V -
RS Stock No. 739-3172
Mfr. Part No.SURF236HF
kr 842,14
Each
Units
Surface Mount 1.22 m 295 mm 80 mm 36 W 2 - Fluorescent - T8 - - 230 V -
RS Stock No. 851-2918
BrandRS PRO
kr 195,19
Each
Units
Single Batten 610 mm 65 mm 75 mm 14 W 1 - Fluorescent - T5 - - 230 V No
RS Stock No. 125-6920
BrandRS PRO
kr 1 424,80
Each
Units
Twin Batten 1.79 m 95 mm 85 mm 60 W 2 - LED - T8 - - 230 V ac -
RS Stock No. 701-3703
Mfr. Part No.MRA436HF
kr 1 078,01
Each
Units
Recessed 1.195 m 595 mm 80 mm 36 W 4 - Fluorescent - T8 - - 230 V -
RS Stock No. 810-0338
Mfr. Part No.SPT52
kr 1 946,39
Each
Units
Twin Batten - - - 35 W 2 - Fluorescent - T5 - - - -
RS Stock No. 701-3744
Mfr. Part No.5FTFLW
kr 877,29
Each
Units
Surface Mount 1.61 m 180 mm 60 mm 58 W 2 - Fluorescent - T8 - - 230 V -
RS Stock No. 701-3713
Mfr. Part No.MRB418HF
kr 471,91
Each
Units
Recessed 595 mm 595 mm 80 mm 18 W 4 - Fluorescent - T8 - - 230 V -
RS Stock No. 851-2949
BrandRS PRO
kr 390,70
Each
Units
Twin Batten 1.51 m 104 mm 75 mm 35 W 2 - Fluorescent - T5 - - 230 V No
RS Stock No. 851-2936
BrandRS PRO
kr 328,08
Each
Units
Twin Batten 1.21 m 104 mm 75 mm 56 W 2 - Fluorescent - T5 - - 230 V No
RS Stock No. 918-1101
BrandRS PRO
kr 722,68
Each
Units
Batten 1.227 m 61 mm 64 mm 30 W 1 Cool White LED 4000K T8 - - - No
RS Stock No. 122-3576
Mfr. Part No.4058075079915
BrandLEDVANCE
kr 947,08
Each
Units
Batten 1.2 m 95 mm 78 mm 39 W 1 Cool White LED 4000K - 50000h - 230 V -
RS Stock No. 125-6914
BrandRS PRO
kr 832,76
Each
Units
Single Batten 1.79 m 60 mm 85 mm 30 W 1 - LED - T8 - - 230 V ac -
RS Stock No. 796-1858
BrandRS PRO
kr 2 248,51
Each
Units
Single Batten 1.557 m 55 mm 87 mm 35 W 1 - Fluorescent - T5 - - 220 → 240 V No
RS Stock No. 125-0607
Mfr. Part No.45173
BrandSylvania
kr 1 273,77
Each
Units
Single Batten 1.205 m 66 mm 76 mm 53 W 1 Cool White Integrated LED 4000K T8 - - 240 V -
RS Stock No. 612-1030
Mfr. Part No.JUB2235J
kr 2 149,80
Each
Units
Single Batten 1.5 m - 78 mm 35 W 2 - Fluorescent - T5 - - 230 V ac -
RS Stock No. 851-3002
BrandRS PRO
kr 160,53
Each
Units
Single Batten 575 mm 63 mm - 14 W 1 - Fluorescent - T5 - - 230 V No
RS Stock No. 125-0610
Mfr. Part No.45176
BrandSylvania
kr 578,91
Each
Units
Single Batten 605 mm 66 mm 76 mm 11 W 1 Warm White Integrated LED 3000K T8 - - 240 V -
Related Products
230V IP65 1x36W 4ft Single High Frequency Non-Corrosive ...
Description:
230V IP65 1x36W 4ft Single High Frequency Non-Corrosive Fluorescent Fitting with Emergency. Brackets for surface mounting3 hour Emergency. Supplied with 10 x fixing clips. Polycarbonate base and diffuser. Push-fit terminals. Compatible with 1x36W 4ft T8 lamp (not supplied).
230V IP65 1x58W 5ft Single High Frequency Non-Corrosive ...
Description:
230V IP65 1x58W 5ft Single High Frequency Non-Corrosive Fluorescent Fitting with Emergency. Brackets for surface mounting3 hour emergency. Supplied with 12 x fixing clips. Polycarbonate base and diffuser. Push-fit terminals. Compatible with 1x58W 5ft T8 lamp (not supplied).
230V IP65 2x18W 2ft Twin High Frequency Non-Corrosive ...
Description:
230V IP65 2x18W 2ft Twin High Frequency Non-Corrosive Fluorescent Fitting. Brackets for surface mounting. Supplied with 6 x fixing clips. Polycarbonate base and diffuser. Push-fit terminals. Compatible with 2x18W 2ft T8 lamp (not supplied).
230V IP65 2x58W 5ft Twin High Frequency Non-Corrosive ...
Description:
230V IP65 2x58W 5ft Twin High Frequency Non-Corrosive Fluorescent Fitting. Brackets for surface mounting. Supplied with 12 x fixing clips. Polycarbonate base and diffuser. Push-fit terminals. Compatible with 2x58W 5ft T8 lamp (not supplied).