PCB Drill Bits

PCB drill bits are used with power tools to remove material and create holes. PCB drill bits come in many sizes and shapes and can create different kinds of holes in many different materials.


Why getting the right drill bit is important


Soft materials can usually be drilled safely with almost any bit. However, hard or brittle materials like glass and acrylic require specially designed PCB drill bits to produce accurate, clean holes. This is especially important when it comes to drilling holes in printed circuit boards because they're made of highly abrasive fibreglass. 


How to use your PCB drill bit to make the perfect hole


Virtually all PCB drill bits are designed to spin clockwise. While this isn't a problem on a drill press, many hand drivers are reversible; if your drill bit is spinning but not cutting, make sure it's going in the right direction. 


Before you start drilling be sure to fully tighten the bit in the drill. Then you can let the tool do most of the work and simply apply some steady pressure. 


...
Read more Read less

Filters

Viewing 1 - 20 of 68 products
Results per page
Description Price Diameter Material
RS Stock No. 198-4606
Mfr. Part No.A720 0.15MM
BrandDormer
kr 148,54
Each
Units
0.15mm Cobalt
RS Stock No. 666-5650
Mfr. Part No.13-111007-1
BrandFortex
kr 28,81
Each
Units
0.7mm Carbide
RS Stock No. 753-8675
Mfr. Part No.DU75.10
BrandCIF
kr 28,00
Each (In a Box of 10)
Units
1.5mm Carbide
RS Stock No. 753-8622
Mfr. Part No.DU75
BrandCIF
kr 47,46
Each
Units
1.5mm Carbide
RS Stock No. 382-002
Mfr. Part No.DW101010
BrandCIF
kr 380,95
Each
Units
0.1mm Carbide
RS Stock No. 457-611
BrandRS PRO
kr 100,01
1 Tube of 5
Tube(s)
1.2mm Steel
RS Stock No. 753-8656
Mfr. Part No.DU70.10
BrandCIF
kr 28,00
Each (In a Box of 10)
Units
1mm Carbide
RS Stock No. 457-617
BrandRS PRO
kr 36,11
1 Tube of 5
Tube(s)
1mm Steel
RS Stock No. 753-8631
Mfr. Part No.DU80
BrandCIF
kr 47,46
Each
Units
2mm Carbide
RS Stock No. 753-8678
Mfr. Part No.DU80.10
BrandCIF
kr 28,90
Each (In a Box of 10)
Units
2mm Carbide
RS Stock No. 745-0847
Mfr. Part No.DU201
BrandCIF
kr 315,35
Each
Units
3.17mm Carbide
RS Stock No. 666-5656
Mfr. Part No.13-111005-1
BrandFortex
kr 28,81
Each
Units
0.6mm Carbide
RS Stock No. 753-8672
Mfr. Part No.DU85.10
BrandCIF
kr 28,90
Each (In a Box of 10)
Units
2.5mm Carbide
RS Stock No. 666-5669
Mfr. Part No.13-111009-1
BrandFortex
kr 28,81
Each
Units
0.8mm Carbide
RS Stock No. 753-8638
Mfr. Part No.DU91
BrandCIF
kr 55,93
Each
Units
3.17mm Carbide
RS Stock No. 753-8634
Mfr. Part No.DU85
BrandCIF
kr 47,46
Each
Units
2.5mm Carbide
RS Stock No. 666-5653
Mfr. Part No.13-111003-1
BrandFortex
kr 28,81
Each
Units
0.5mm Carbide
RS Stock No. 753-8619
Mfr. Part No.DU70
BrandCIF
kr 52,84
Each
Units
1mm Carbide
RS Stock No. 666-5681
Mfr. Part No.13-111021-1
BrandFortex
kr 28,81
Each
Units
1.4mm Carbide
RS Stock No. 457-633
BrandRS PRO
kr 285,23
1 Tube of 5
Tube(s)
0.8mm Carbide
Related Products
HSS miniature twist drill bits for use with ...
Description:
HSS miniature twist drill bits for use with PCB drills. Drills have 2.35mm diameter shank. Produce clean holes in multi-layer PCB boards.
Miniature solid Tungsten Carbide drill bits for use ...
Description:
Miniature solid Tungsten Carbide drill bits for use with PCB drills. Straight or Shoulder shank types available (Shoulder types have Ø3.2 shank)Produce clean holes in multi-layer or standard circuit boards.
HSCo drill for small diameter drilling in most ...
Description:
HSCo drill for small diameter drilling in most materials up to x2.5 diameter. All drills supplied on 1mm shank. Manufactured to DIN1899 Standards.
High grade solid carbide PCB drills, drills remain ...
Description:
High grade solid carbide PCB drills, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage. These drill bits are fitted ...