Brass & Copper Solder Fittings

Brass and copper solder fittings are pre-soldered fittings used predominantly in plumbing systems to connect copper pipes.

How do brass and copper solder fittings work?

Brass and copper solder fittings use the principle of capillary action to ensure that, when correctly joined to copper tube, a sufficient layer of lead-free solder is present between tube and fittings to form a mechanically strong, leak proof joint without the need for external solder application. Both the pipes and the fitting should be cleaned with wire wool before use. You can then slide the pipes into the fitting, ensuring that they're pushed all the way in, and apply heat to the rings of solder (indicated by ridges on the outside of the fitting) to secure the joint.

What are brass and copper solder fittings used for?

These fittings can be used to help convey drinking water, light mineral oils, natural or liquid petroleum gases or compressed air. They come in straight, elbow, T-shaped and reducer configurations, depending on your needs.


...
Read more Read less

Filters

Viewing 1 - 5 of 5 products
Results per page
Description Price Fitting Direction Fitting Type Compatible Pipe Size Material Solder Type
RS Stock No. 796-212
Mfr. Part No.TP01R2815
kr 67,42
Each (In a Pack of 2)
Units
Straight Reducer Coupler 28 x 15mm Copper Solder Ring
RS Stock No. 797-007
Mfr. Part No.TP0115
kr 4,413
Each (In a Pack of 25)
Units
Straight Coupler 15 x 15mm Copper Solder Ring
RS Stock No. 797-114
Mfr. Part No.TP2415
kr 15,602
Each (In a Pack of 10)
Units
- Equal Tee 15 x 15 x 15mm Copper Solder Ring
RS Stock No. 797-085
Mfr. Part No.TP1222
kr 17,72
Each (In a Pack of 10)
Units
90° Elbow 22 x 22mm Copper Solder Ring
RS Stock No. 797-079
Mfr. Part No.TP1215
kr 8,694
Each (In a Pack of 25)
Units
90° Elbow 15 x 15mm Copper Solder Ring
Related Products
The Shark. Bite Push-Fit Solution is a quick ...
Description:
The Shark. Bite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PEX pipes in any combination, without the requirement for heavy and expensive tools or obtaining hot work permits for soldering joints. The ...
The Pegler Yorkshire 28mm 90° copper S12 elbow ...
Description:
The Pegler Yorkshire 28mm 90° copper S12 elbow is used with hard and half-hard copper tubes. It has a press-fit connection type. • Ambient temperature ranges between 15°C and 95°C• Clean, rapid and heat-free jointing. No complicated clamping techniques, long ...
The Pegler Yorkshire 15mm 90MF copper S12S street ...
Description:
The Pegler Yorkshire 15mm 90MF copper S12S street elbow is used with hard and half-hard copper tubes. It has a press-fit x male end for insertion into fitting connection type. • Ambient temperature ranges between 15°C and 95°C• Clean, rapid ...
The Pegler Yorkshire 28mm copper S1 MI straight ...
Description:
The Pegler Yorkshire 28mm copper S1 MI straight male connector coupling is used with hard and half-hard copper tubes. It has a press-fit x BSP taper male thread connection type. • Ambient temperature ranges between 15°C and 95°C• Clean, rapid ...