Radiator Valves

Thermostatic radiator valves, or TRVs, are used in heating systems to change the flow of hot water to a radiator. This allows the user to regulate the temperature of a particular room, independent of the boiler setting, or any temperature control valve prior to that radiator.

The radiator valves are self-regulating, and typically have a maximum pre-set temperature. By only heating a room as needed, TRVs can reduce heating bills and prevent energy being wasted.

The RS Components range offers thermostatic radiator valves from leading brands, for reliable and cost effective plumbing and heating solutions.

How do TRVs work?

The thermostatic head of a TRV has a sensor which contains a wax or similar material that expands in response to rising temperatures, and contracts when cooling. This sensor in turn operates a valve that regulates the flow of hot water passing through it. When a warmer temperature is reached, the flow is constricted. This is what allows the thermostatic valve to keep a room consistently heated.

Applications

TRVs usually have a manual setting, allowing you to set them at the desired operating temperature to suit the room the radiator or towel warmer is in. Settings normally cover anything from basic frost protection, to keeping a bedroom cosy. To keep an optimum temperate in commercial or domestic properties, thermostatic radiator valves are essential.

Where Should I Install a Thermostatic Radiator Valve?

A thermostatic radiator valve is installed in the pipe that feeds from boiler to the radiator. Because they rely on sensing the room’s temperature, it is important to make sure TRVs are not covered up or insulated. For instance, if the TRV is covered with curtains, its sensor may perceive the room temperature as warmer than it actually is, and may result in the room not being heated as needed.

What type of Thermostatic Radiator Valve Should I Buy?

The RS range includes straight and right angle TRV fittings, in brass or chrome plated brass to match your pipework accordingly.

There are also kits available that come with lockshield valves. Lockshields are an additional valve that is usually placed on the return pipe, and can be adjusted to increase or decrease the flow rate of the hot water. This helps ’balance’ the radiator, and makes sure it is operating as efficiently as possible. Lockshields typically come with plastic caps to prevent them being accidentally tampered with.

...
Read more Read less

Filters

Viewing 1 - 12 of 12 products
Results per page
Description Price Connection 1 Connection 2 Body Material Valve Type Maximum Working Pressure Connection Size 1 Connection Size 2 Maximum Set Temperature Minimum Set Temperature Thread Standard or Connection Type 1 Thread Standard or Connection Type 2 Temperature Setting Range
RS Stock No. 313-7032
BrandRS PRO
kr 103,28
Each
Units
3/8 in BSPT 3/8 in BSPT Brass Manual 10 bar 3/8in 3/8in - - BSPT BSPT -
RS Stock No. 784-5649
BrandRS PRO
kr 63,49
Each
Units
15 mm Male 1/2 in Male Brass Angle 10 bar 15mm 1/2in - - - - -
RS Stock No. 196-1849
Mfr. Part No.601028
kr 122,64
Each
Units
15 mm Compression 1/2 in BSP Chrome Plated Brass Angle 10 bar 15mm 1/2in - - - BSP -
RS Stock No. 312-1778
Mfr. Part No.07 25 020
BrandDrayton
kr 313,92
Each
Units
- - - Thermostatic - - - +27°C +10°C - - +10 → +27 °C
RS Stock No. 312-1740
Mfr. Part No.07 15 091
BrandDrayton
kr 178,31
Each
Units
1/2 in BSP 1/2 in BSP Chrome Plated Brass Angle 10 bar 1/2in 1/2in +30°C +10°C BSP BSP +10 → +30 °C
RS Stock No. 196-1855
Mfr. Part No.601038
kr 122,64
Each
Units
15 mm Compression 1/2 in BSP Chrome Plated Brass Angle 10 bar 15mm 1/2in - - - BSP -
RS Stock No. 312-1712
Mfr. Part No.07 05 090
BrandDrayton
kr 384,56
Each
Units
1/2 in BSP 1/2 in BSP Chrome Plated Brass Angle 10 bar 15 mm, 1/2 in 15 mm, 1/2 in +30°C +10°C BSP BSP +10 → +30 °C
RS Stock No. 312-1762
Mfr. Part No.07 15 093
BrandDrayton
kr 208,80
Each
Units
1/2 in BSP 1/2 in BSP Chrome Plated Brass Angle 10 bar 1/2in 1/2in +30°C +10°C BSP BSP +10 → +30 °C
RS Stock No. 196-1906
Mfr. Part No.680007
kr 225,55
Each
Units
15 mm Compression 1/2 in BSP Chrome Plated Brass Angle 10 bar 15mm 1/2in - - - BSP -
RS Stock No. 312-1756
Mfr. Part No.07 15 092
BrandDrayton
kr 187,18
Each
Units
1/2 in BSP 1/2 in BSP Chrome Plated Brass Thermostatic 10 bar 1/2in 1/2in +30°C +10°C BSP BSP +10 → +30 °C
RS Stock No. 196-1912
Mfr. Part No.680008
kr 225,21
Each
Units
15 mm Compression 1/2 in BSP Chrome Plated Brass Angle 10 bar 15mm 1/2in - - - BSP -
RS Stock No. 342-4566
Mfr. Part No.CA-200415.R
BrandAltecnic
kr 228,87
Each
Units
1/2 in BSP 1/2 in BSP Brass Angle 10 bar 1/2in 1/2in +28°C 0°C BSP BSP 0 → +28 °C
Related Products
Single check valve protects against the risk of ...
Description:
Single check valve protects against the risk of back flow and back syphonage contaminations. Compact lightweight construction for easy installation. Minimum pressure drop giving good flow rates. Ideal for all Class 2 contamination risks as per Water Supply (water fittings) ...
Banjo with external screw, push-in connection. Reliable and ...
Description:
Banjo with external screw, push-in connection. Reliable and progressive adjustment. Lock nut guaranteeing stability of adjustment. Robust construction for improved longevity. Treated brass body extremely resistant to external aggressions - temperature, sparking, corrosion.
Body material - DZR Brass. For heating systems ...
Description:
Body material - DZR Brass. For heating systems and pressurised water systems. Cartridge design for ease of service and replacement. High lift design for increased discharge capacity.
The differential bypass valve is used to stabilise ...
Description:
The differential bypass valve is used to stabilise the circulation, flow rate and pump pressures in central heating systems. Designed for a quick and simple installation where the valve is set using a visual dial based on your system calculations ...