Steam Traps

Steam traps are a type of automatic valve that filters out condensed steam and non-condensed steam, such as air without letting steam escape. Steam is used for regularly for heating or as a driving force for mechanical power. Used to ensure that the steam is not wasted in such applications.
Mechanical Traps
Mechanical traps sense the difference in density between steam and condensate. Condensate from this type of trap is continually discharged, leaving none to the process. These are the most commonly used steam traps utilised today in systems that require large discharge capacities.
Bucket traps use an inverted bucket as a float device that releases the condensate once the bucket to loses buoyancy and sinks, opening the valve allowing the condensate to be released.
A floating ball trap is a simple mechanical trap that uses the weight of the ball, which acts as a lever keeping the valve closed. As condensate enters the trap it raises the float, opening the valve releasing the condensate.
Thermostatic Traps
Thermostatic traps utilise a temperature sensing element to determine when to discharge the condensate.
Balanced pressure traps operate by balancing the steam pressure and internal pressure of the thermostatic element. At start-up the valve is open, but once the steam reaches a certain temperature bellow expand to close it. These steam traps can be used in steam tracing applications.
Thermodynamic Traps
Thermodynamic traps use the difference in velocity between steam and condensate to operate. As steam enters, it can be freely discharged through a valve. When steam reaches the underside of the disc its velocity is much higher than condensate, creating a pressure drop which closes the valve head. The valve stays shut until the steam pressure above the disc drops, allowing the valve to open and the discharge cycle to repeat.
Steam Trap Types
There are three main types of steam traps to consider, these are:
Applications
Steam traps can be used anywhere there is a steam system and a need to discharge condensate. These include:
• Industrial dryers
• Laundries
• Space heating
• Steaming ovens

...
Read more Read less

Filters

Viewing 1 - 20 of 62 products
Results per page
Description Price Trap Type Connection Orientation Maximum Working Pressure Maximum Temperature Body Material Gasket Material Connection Gender Connection Size Thread Standard or Connection Type
RS Stock No. 365-6410
Mfr. Part No.1458700
kr 5 730,66
Each
Units
Thermostatic 1 in BSP Female Vertical 10 bar +240°C Iron Graphite Female 1in BSP
RS Stock No. 365-6319
Mfr. Part No.1534097
kr 3 015,73
Each
Units
Thermodynamic 1/2 in NPT Female Horizontal 42 bar +400°C Stainless Steel Graphite Female 1/2in NPT
RS Stock No. 365-6432
Mfr. Part No.1226300
kr 1 938,27
Each
Units
Thermostatic 1/2 in BSP Female Horizontal 13 bar +250°C Brass Stainless Steel Female 1/2in BSP
RS Stock No. 720-9226
BrandRS PRO
kr 2 573,46
Each
Units
Float & Thermostatic 3/4 in BSP Female Horizontal, Vertical 10 bar +198°C Iron - Female 3/4in BSP
RS Stock No. 507-5908
Mfr. Part No.1458100
kr 3 842,74
Each
Units
Ball Float 1/2 in BSP Horizontal 10 bar +250°C Stainless Steel Graphite - 1/2in BSP
RS Stock No. 507-5885
Mfr. Part No.1458200
kr 3 842,74
Each
Units
Ball Float 1/2 in BSP Horizontal 14.6 bar +250°C Stainless Steel Graphite - 1/2in BSP
RS Stock No. 720-9232
BrandRS PRO
kr 2 878,74
Each
Units
Float & Thermostatic 1 in BSP Female Horizontal, Vertical 10 bar +198°C SG Iron Graphite, Stainless Steel Female 1in BSP
RS Stock No. 507-6298
Mfr. Part No.51400
kr 3 459,29
Each
Units
Thermostatic 3/4 in BSP Female Horizontal, Vertical 32 bar +300°C Steel Stainless Steel Female 3/4in BSP
RS Stock No. 507-5857
Mfr. Part No.1458500
kr 3 842,74
Each
Units
Ball Float 3/4 in BSP Horizontal 14.6 bar +250°C Stainless Steel Graphite - 3/4in BSP
RS Stock No. 720-9194
BrandRS PRO
kr 1 450,44
Each
Units
Thermodynamic 1/2 in BSP Female Horizontal 42 bar +300°C Carbon Steel Graphite Female 1/2in BSP
RS Stock No. 917-1892
Mfr. Part No.440675
kr 9 905,39
Each
Units
- - Vertical 20 bar - Stainless Steel - - - -
RS Stock No. 799-8897
Mfr. Part No.29001
kr 1 725,88
Each
Units
Float & Thermostatic 3/4 in Horizontal, Vertical 4.5 bar +198°C SG Iron Graphite, Stainless Steel - 3/4in BSP
RS Stock No. 720-9223
BrandRS PRO
kr 2 878,74
Each
Units
Float & Thermostatic 1 in BSP Female Horizontal, Vertical 4.5 bar +198°C Iron Graphite, Stainless Steel Female 1in BSP
RS Stock No. 365-6325
Mfr. Part No.1534197
kr 4 514,52
Each
Units
Thermodynamic 3/4 in NPT Female Horizontal 42 bar +400°C Stainless Steel Graphite Female 3/4in NPT
RS Stock No. 365-6426
Mfr. Part No.1458800
kr 5 730,66
Each
Units
Thermostatic 1 in BSP Female Vertical 14 bar +240°C Iron Graphite Female 1in BSP
RS Stock No. 917-1899
Mfr. Part No.551275
kr 5 444,22
Each
Units
Thermostatic - Horizontal, Vertical 10 bar - SG Iron Stainless Steel Female - -
RS Stock No. 720-9207
BrandRS PRO
kr 2 217,23
Each
Units
Thermodynamic 1 in BSP Female Horizontal 42 bar +300°C Stainless Steel Graphite Female 1in BSP
RS Stock No. 917-1760
Mfr. Part No.481117
kr 6 066,94
Each
Units
Thermostatic - Vertical 6 bar +165°C Stainless Steel - - 3/4in -
RS Stock No. 917-1710
Mfr. Part No.348536
kr 3 696,68
Each
Units
- - Vertical - - Carbon Steel - - - -
RS Stock No. 917-1748
Mfr. Part No.348540
kr 8 318,97
Each
Units
- - Vertical - - Carbon Steel - - - -
Related Products
TD42L designed for relatively small condensate loads and ...
Description:
TD42L designed for relatively small condensate loads and ideal for mains drainage applications. TD42H is ideal for process type loads. Screwed BSP with in-built strainer. Compact and lightweight, reducing installation costs. Positive discharge with clean tight shut-off. No back-up of ...
All units PN16 with Stainless Steel internal parts ...
Description:
All units PN16 with Stainless Steel internal parts and Reinforced Exfoliated Graphite gaskets, Straight Orientation; Maximum Operating Pressure - 14bar g; Maximum Allowable Pressure - 16 bar g; Maximum Cold Hydraulic Test Pressure - 24bar g; Cover Bolts Material - ...
All units PN16 with Stainless Steel internal parts ...
Description:
All units PN16 with Stainless Steel internal parts and Reinforced Exfoliated Graphite gaskets, Straight Orientation; Maximum Operating Pressure - 14bar g; Maximum Allowable Pressure - 16 bar g; Maximum Cold Hydraulic Test Pressure - 24bar g; Cover Bolts Material - ...
A compact, lightweight and easy to install thermodynamic ...
Description:
A compact, lightweight and easy to install thermodynamic disc steam trap which is excellent for high pressure systems including steam tracing applications. Manufactured from stainless steel this steam trap has only one moving part and offers a wide operating range, ...