Bearing Heaters

Bearing heaters are used to quickly and evenly increase the temperature of bearings via induction heating, which makes it easier to mount them onto a shaft. Most bearing heaters come in 230V and 110V versions.

 

What are bearing heaters used for?

Bearing heaters form part of the tools suite used when repairing or building power transmissions. They make it possible to install bearings without having to execute force using hand tools, which can cause damage.


You can also use bearing heaters to heat other components, like gears, pulleys, bushings and shrink rings, as long as the heated parts form a closed electrical circuit. 

 

Types of bearing heaters

Induction coil bearing heaters and portable bearing induction heaters are the main types available.

 

Coil bearing heaters distribute heat evenly onto bearings with an interference fit mounting. The attached coil is on the outside of the heater component, resulting in reduced heating periods and efficient energy consumption.

 

Portable induction heaters are lightweight, quiet and do not magnetise components. These heaters are suitable for bearings of up to 4.5kg.


...
Read more Read less

Filtre

Viser 1 - 11 av 11 produkter
Resultat pr. side
Beskrivelse Pris Supply Voltage Maximum Bore Size Minimum Bore Size
RS-lagernummer 732-4726
Producentens varenummer729659 C
BrandSKF
kr 8 431,48
Each
enheter
230V ac 100mm -
RS-lagernummer 448-7164
Producentens varenummerTMBH 1
BrandSKF
kr 17 983,79
Each
enheter
100 → 240V ac 100mm 20mm
RS-lagernummer 497-9584
Producentens varenummerTIH030M 230V
BrandSKF
kr 24 668,16
Each
enheter
230V ac 300mm 20mm
RS-lagernummer 845-9564
Producentens varenummerTIH100M 230V
BrandSKF
kr 36 548,20
Each
enheter
200 → 240V 400mm 20mm
RS-lagernummer 680-8018
Producentens varenummerTIH030M/110V
BrandSKF
kr 25 145,19
Each
enheter
110V ac 300mm 20mm
RS-lagernummer 183-2641
Producentens varenummerBH-02B/EUROPE
BrandConemount
kr 9 376,11
Each
enheter
- 145mm 10mm
RS-lagernummer 183-2642
Producentens varenummerBH-02B/UK
BrandConemount
kr 9 376,11
Each
enheter
- 145mm 10mm
RS-lagernummer 183-2643
Producentens varenummerBH-02C/EUROPE
BrandConemount
kr 10 311,30
Each
enheter
- 145mm 10mm
RS-lagernummer 183-2649
Producentens varenummerBH-02S/UK
BrandConemount
kr 14 521,03
Each
enheter
- 205mm 20mm
RS-lagernummer 183-2646
Producentens varenummerBH-02C/UK
BrandConemount
kr 10 311,30
Each
enheter
- 145mm 10mm
RS-lagernummer 183-2647
Producentens varenummerBH-02S/EUROPE
BrandConemount
kr 14 521,03
Each
enheter
- 205mm 20mm
Relaterte Produkter
Prevent formation of condensation and provide an evenly ...
Description:
Prevent formation of condensation and provide an evenly distributed interior air temperature in enclosures with electric/electronic components. Connected using internal terminal connectors. Small, compact design ideal for use where space is at a premiumPlastic casing according to UL-94-0, blackQuiet ...
The CSF series of slimline high performance fan ...
Description:
The CSF series of slimline high performance fan heaters prevent formation of condensation and frost and provide an evenly distributed interior air temperature in enclosures with electric/electronic components. The plastic enclosure provides double insulation and acts as protection against contact. ...
F617 electric convector. Shielded resistor with aluminium diffuser. ...
Description:
F617 electric convector. Shielded resistor with aluminium diffuser. Multi-rate digital thermostat, 6 setting in-series pilot wire. Changeover mode: Stop/Frost protection/Program/Comfort/Eco.The F617 is controlled by an Atlantic Pass Program device fitted with Chronopass (optional).Shielded resistor with aluminium ...
The Koolbreeze KFF13 is a 13.9kW nominal output, ...
Description:
The Koolbreeze KFF13 is a 13.9kW nominal output, 415V 3-phase industrial fan heater. The heater provides safe no-fume heating of large workshops and factory areas. Developed to give large heated air volume with an up-rated air moving system. Full overheat ...