Air Rivet Guns

Use an air rivet gun to join & secure materials together. These guns are known as a pneumatic riveter, pneumatic pop rivet gun or air riveter, used to drive rivet pins. Our rivet gun range includes leading brands such as Bahco, RS PRO & PREVOST.


How are they used?


Air rivet guns are powered by an air compressor via an air hose feed, during application a rivet pin should be inserted into the riveter, place the pinhead into the hole of the materials you wish to secure then squeeze the trigger (for a pneumatic riveter one pull of the trigger is usually enough). This operation pulls the pinhead then the rivet pin expands, the excess stem breaks off leaving the rivet permanently fixed in position holding the two pieces of material together.


How do they work?



  • Pneumatic rivet guns - Regulated air passes through a throttle valve which is typically controlled by a trigger in the handgrip. When the trigger is squeezed, the throttle valve opens, allowing the pressurised air to flow into the piston. This provides a higher amount of force to the rivet reducing the risk of damage and creating uniformity in the positioning and depth of the rivets.

  • Air riveters - are an essential air tool for heavy-duty applications. If you have a large number of rivets to set this is the ideal option, quick and easy and virtually fatigue-free.

  • Slow-hitting gun - For use on hard rivets, slow-hitting rivet guns deliver repeated blows to the rivet as long as the trigger is compressed. Averaging approximately 2,500 bpm (blows per minute) offering increased control, accuracy and less kick than guns that deliver a single blow.

  • Fast-hitting gun - These operate in a similar way to the slow-hitting versions, but at a higher rate of speed. The faster blows are less intense than the slower blows, making this type of gun more appropriate for rivets made of softer materials.
    Rivet guns are used in Industrial applications, workshops, and garages.

...
Read more Read less

Filters

Viewing 1 - 7 of 7 products
Results per page
Description Price Length Weight Maximum Rivet Size Air Inlet BSP Model Number
RS Stock No. 739-8427
BrandRS PRO
kr 3 247,38
Each
Units
175mm 1.6kg 3/16 in 1/4in APT690
RS Stock No. 763-0790
Mfr. Part No.BP125
BrandBahco
kr 4 004,65
Each
Units
290mm 2kg 6.4 mm - BP125
RS Stock No. 468-3564
Mfr. Part No.580-701
BrandMTI
kr 1 144,38
Each
Units
- - 4.8 mm - -
RS Stock No. 181-2923
Mfr. Part No.TAR 641895
BrandPREVOST
kr 4 187,20
Each
Units
273mm 2.1kg 6.4 mm 1/4 BSPF TAR 641895
New
RS Stock No. 200-5581
Mfr. Part No.DRV250Z
BrandMakita
kr 7 401,13
Each
Units
323mm 2.1kg 6.4 mm - DRV250Z
RS Stock No. 181-2922
Mfr. Part No.TAR 481220
BrandPREVOST
kr 1 774,46
Each
Units
273mm 1.5kg 4.8 mm 1/4 BSPF TAR 481220
New
RS Stock No. 200-5579
Mfr. Part No.DRV150Z
BrandMakita
kr 7 401,13
Each
Units
313mm 1.9kg 4.8 mm - DRV150Z
Related Products
Pistol-grip handle Supplied with a set of 19 ...
Description:
Pistol-grip handle Supplied with a set of 19 needles, diam. 3 mm. Comfortable grip. Suitable for prolonged work in difficult conditions. ApplICat. IonsStripping of rust, welding, layers of paint and other coatings using a hammering action. Also used in certain ...
Special version designed for removing dust, debris and ...
Description:
Special version designed for removing dust, debris and swarf from blind holes up to 18 inches deep. Plastic probe jets high pressure air into the hole to dislodge particles which are safely sucked away by the main nozzle. Main nozzle ...
Quickly transforms a quick-release coupling into a safety ...
Description:
Quickly transforms a quick-release coupling into a safety blowgun. Direct connection to all 6-mm diameter Stäubli compressed air quick-release couplings for fast, easy incorporation into your installation.Coupling acts as blowgun handle.Practical. Blowgun can easily be hung on the parking bracket, ...
Ergonomically designed lightweight blow gun with fluted handle ...
Description:
Ergonomically designed lightweight blow gun with fluted handle for comfort. Sensitive trigger enabling easy control. Long angled nozzle enables user to reach awkward areas1/4in BSP Inlet. Max Working Pressure 10 bar.