End Mills

An end mill is a type of cutting tool that is used in milling applications. End Mills have cutting edges on the end and sides of the shank enabling them to cut in all directions.


Why use an end mill?


The end mill removes material by their movement within the milling machine or from the cutter’s shape.


The number of flutes (spirals on the end mill) give different results:



  • 2 flutes allow maximum space for chip ejection and are used for general milling operations

  • 3 flutes is an excellent choice for slotting, it has a larger cross-section and is used in general milling operations

  • 4, 5, 6 and 8 flutes can improve the surface finish if the feed rate remains the same. A greater number of flutes reduces chip load and produces a much finer finish

What types of End Mills are available?


End cut types:



  • Centre cutting end mills have one or more cutting edges at the tip to allow the user to plunge, drill or ramp into a cut.

  • Non-Centre cutting end mills have peripheral teeth that allow the user to side cut or contour an external surface.

Shank Types



  • End mills with a plain shank are used with a collet style holder and are the most common shank type

  • End mills with a Weldon shank have one or two flats with set screws in the holder that tighten on the flanks of flats to hold the mill to prevent it
    from rotating

Typical applications of End Mills


End mills are used for profiling milling, face milling, tracer milling, semi-finishing and finishing.


...
Read more Read less

Filters

Viewing 1 - 20 of 91 products
Results per page
Description Price Cutter Diameter Cut Length Number of Flutes Material Overall Length Shank Type Shank Diameter Centre Cutting Diameter Tolerance
RS Stock No. 523-0436
BrandRS PRO
kr 99,25
Each
Units
1mm 2mm - HSCo 24.5 mm Weldon 6 mm - -
RS Stock No. 523-0593
BrandRS PRO
kr 103,29
Each
Units
5mm 12.5mm - HSS 44.5 mm Weldon 6 mm - -
RS Stock No. 523-0600
BrandRS PRO
kr 89,38
Each
Units
6mm 16mm - HSS 48 mm Weldon 6 mm - -
RS Stock No. 523-0464
BrandRS PRO
kr 95,08
Each
Units
2.5mm 4mm - HSCo 26 mm Weldon 6 mm - -
RS Stock No. 523-0492
BrandRS PRO
kr 94,97
Each
Units
4mm 6.5mm - HSCo 32.5 mm Weldon 6 mm - -
RS Stock No. 523-0537
BrandRS PRO
kr 89,38
Each
Units
2mm 4.5mm - HSS 29 mm Weldon 6 mm - -
RS Stock No. 523-0515
BrandRS PRO
kr 95,41
Each
Units
6mm 9.5mm - HSCo 36 mm Weldon 6 mm - -
RS Stock No. 523-0458
BrandRS PRO
kr 97,83
Each
Units
2mm 3mm - HSCo 25.5 mm Weldon 6 mm - -
RS Stock No. 523-0543
BrandRS PRO
kr 106,93
Each
Units
2.5mm 6.5mm - HSS 32 mm Weldon 6 mm - -
RS Stock No. 185-7558
BrandRS PRO
kr 2 253,82
Pr. Set
Set(s)
3 mm, 4 mm, 6 mm, 8 mm 9.5 mm, 12.5 mm - HSCo 54 mm, 57 mm, 60.5 mm, 63.5 mm, 66.5 mm, 70 mm, 73 mm, 77 mm, 80 mm, 83.5 mm Screwed 6 mm, 12 mm, 16 mm Yes -
RS Stock No. 523-0559
BrandRS PRO
kr 89,60
Each
Units
3mm 7.5mm - HSS 34 mm Weldon 6 mm - -
RS Stock No. 523-0521
BrandRS PRO
kr 99,91
Each
Units
1.5mm 4mm - HSS 28 mm Weldon 6 mm - -
RS Stock No. 523-0470
BrandRS PRO
kr 95,63
Each
Units
3mm 4.5mm - HSCo 28 mm Weldon 6 mm - -
RS Stock No. 523-0486
BrandRS PRO
kr 94,97
Each
Units
3.5mm 5.5mm - HSCo 30 mm Weldon 6 mm - -
RS Stock No. 523-0509
BrandRS PRO
kr 98,15
Each
Units
5mm 7.5mm - HSCo 36 mm Weldon 6 mm - -
RS Stock No. 136-8073
BrandRS PRO
kr 1 316,64
Each
Units
8 mm, 10 mm, 12 mm, 16 mm, 20 mm - - HSS 100 mm Screwed - Yes -
RS Stock No. 523-0571
BrandRS PRO
kr 89,38
Each
Units
4mm 9.5mm - HSS 39 mm Weldon 6 mm - -
RS Stock No. 523-0565
BrandRS PRO
kr 90,70
Each
Units
3.5mm 8.5mm - HSS 36.5 mm Weldon 6 mm - -
RS Stock No. 666-6700
Mfr. Part No.S9046.0
BrandDormer
kr 196,81
Each
Units
6mm 19mm - Solid Carbide 57 mm Plain 6 mm Yes -
RS Stock No. 866-0622
Mfr. Part No.32A3R042B32-SLN12-C
BrandPramet
kr 2 958,92
Each
Units
32mm 42mm - - 103 mm Weldon 32 mm - -
Related Products
These slot drills have a parallel shank with ...
Description:
These slot drills have a parallel shank with flats, diameter tolerance e8 (undersize h10), 3 flute, short length, centre cutting, 30° spiral, HSCo 8%. They are to DIN327 form D. Applications include keyway and slot milling, and production of closed ...
A range of standard length and long series ...
Description:
A range of standard length and long series Clarkson Osborn FC3 throw-away milling cutters. Manufactured from High Speed Cobalt steel (HSSE) and intended for use in Clarkson FC3 Holders and adaptors.
Four-flute. To DIN 6535, UK STANDARD 3 & ...
Description:
Four-flute. To DIN 6535, UK STANDARD 3 & 4Plain shank with special web design. Flute helix angle 38°Suitable for high speed, high temperature cutting and finishing of abrasive materials. Tungsten carbide (grade K10)h6 diameter tolerance.
Introducing the Dormer's multi-application MC-X solid carbide end ...
Description:
Introducing the Dormer's multi-application MC-X solid carbide end mills cutters that are manufactured from micro-grain, high-quality carbide to provide increased hardness and toughness for excellent wear-resistance and long tool life. The flute geometry of the 4 flute cutters is capable ...