Lathe Tool Holders & Inserts

Lathe tool holders are used to secure lathe tools in place during a range of processes, including facing, threading and boring. Lathes are devices used in areas like metalworking to rotate a workpiece. Tool holders usually attach to lathes through the toolpost. Though most lathes support tool holders, not all do. Check your lathe is compatible before choosing one.


What are the advantages of lathe tool holders?


Lathe tool holders are usually made from a tougher material than the tool itself, meaning they can effectively support a precision cutting implement. They also offer flexibility and extended functionality. They can control the angle of the tool, extend or retract it as necessary or be spring-loaded to deflect the tool if too much force is applied.


Why use lathe tool holders?


There are several additional ways in which lathe tool holders allow a greater range of use of tool bits.



  • They can change the angle of the tool bit.

  • They can change the level of overhang in the tool bit.

  • They can direct fluid to the work area.

  • They may deflect the tool bit away from the piece when an excessive load is added.

...
Read more Read less

Filters

Viewing 1 - 20 of 81 products
Results per page
Description Price Approach Angle Lathe Part Series For Use With Length Height
RS Stock No. 866-0408
Mfr. Part No.PWLNR 2525 M 0604
BrandPramet
kr 1 412,65
Each
Units
95° Lathe Tool Holder PWLN(RL) EXT WNMG 0604 150mm 25mm
RS Stock No. 866-0398
Mfr. Part No.PWLNR 2020 K 0604
BrandPramet
kr 1 339,77
Each
Units
95° Lathe Tool Holder PWLN(RL) EXT WNMG 0604 125mm 20mm
RS Stock No. 866-0650
Mfr. Part No.TPMR110308E-46:T9325
BrandPramet
kr 761,81
1 Box of 10
Box(es)
- Lathe Insert TPMR CTFPR 11 11mm -
RS Stock No. 866-0341
Mfr. Part No.A20Q-SDQCR 11
BrandPramet
kr 2 093,40
Each
Units
107° Lathe Tool Holder SDQC(RL) INT DCMT 11T3 180mm 20mm
RS Stock No. 866-0405
Mfr. Part No.S25T-PWLNR 0604
BrandPramet
kr 3 709,64
Each
Units
95° Lathe Tool Holder PWLN(RL) INT WNMG 0604 300mm 25mm
RS Stock No. 866-0350
Mfr. Part No.32-DU 2532
BrandPramet
kr 2 885,42
Each
Units
90° Lathe Tool Holder DU / D XLCFN 32 110mm 25mm
RS Stock No. 866-0552
Mfr. Part No.DCLNR 2525 M 12
BrandPramet
kr 1 412,65
Each
Units
95° Lathe Tool Holder DCLN(RL) EXT CNMG 1204 150mm 25mm
RS Stock No. 866-0534
Mfr. Part No.CCMT 09T304E-FF:T8330
BrandPramet
kr 1 007,27
1 Box of 10
Box(es)
95° Lathe Insert CCMT SCLCR 09 9.7mm 3.97mm
RS Stock No. 866-0512
Mfr. Part No.TPMR 160304E-47:T9325
BrandPramet
kr 1 083,94
1 Box of 10
Box(es)
- Lathe Insert TPMR - 16.5mm 3.18mm
RS Stock No. 866-0354
Mfr. Part No.XLCFN 2601 J 2.00
BrandPramet
kr 1 288,72
Each
Units
90° Lathe Tool Holder XLCFN B LFMX 2.2- 110mm 26mm
RS Stock No. 866-0483
Mfr. Part No.CNMG 120404E-FM:T9315
BrandPramet
kr 1 265,39
1 Box of 10
Box(es)
95° Lathe Insert CNMG DCLNR 12 12.9mm 4.76mm
RS Stock No. 866-0417
Mfr. Part No.DNMG 110408E-M:T9325
BrandPramet
kr 1 333,69
1 Box of 10
Box(es)
93° Lathe Insert DNMG - 11.6mm 4.76mm
RS Stock No. 866-0565
Mfr. Part No.26-DU 2020
BrandPramet
kr 2 683,23
Each
Units
90° Lathe Tool Holder DU / D XLCFN 26 90mm 20mm
RS Stock No. 866-0439
Mfr. Part No.CCMT 09T304E-FM:T9325
BrandPramet
kr 1 007,27
1 Box of 10
Box(es)
95° Lathe Insert CCMT SCLCR 09 9.7mm 3.97mm
RS Stock No. 136-3984
Mfr. Part No.CNMG 120408E-M:T8330
BrandPramet
kr 112,641
Each (In a Pack of 10)
Units
95° Lathe Insert CNMG DCLNR 12 12.9mm 4.76mm
RS Stock No. 866-0502
Mfr. Part No.TNMG 160404E-FM:T9315
BrandPramet
kr 1 106,97
1 Box of 10
Box(es)
93° Lathe Insert TNMG MTJNR 16.5mm 4.76mm
RS Stock No. 866-0420
Mfr. Part No.CCMT 060204E-FM:T9325
BrandPramet
kr 874,27
1 Box of 10
Box(es)
95° Lathe Insert CCMT SCLCR 06 6.4mm 2.38mm
RS Stock No. 866-0473
Mfr. Part No.CNMG 120404E-FM:T9325
BrandPramet
kr 1 265,39
1 Box of 10
Box(es)
95° Lathe Insert CNMG DCLNR 12 12.9mm 4.76mm
RS Stock No. 866-0467
Mfr. Part No.DCMT 11T308E-FM:T9325
BrandPramet
kr 1 181,05
1 Box of 10
Box(es)
93° Lathe Insert DCMT SDJCR 11 11.6mm 3.97mm
RS Stock No. 866-0509
Mfr. Part No.TNMG 160408E-M:T9325
BrandPramet
kr 1 106,97
1 Box of 10
Box(es)
93° Lathe Insert TNMG MTJNR 16.5mm 4.76mm
Related Products
TCMT inserts provide 3 cutting edges for improved ...
Description:
TCMT inserts provide 3 cutting edges for improved economy. Suitable for chamfering in a wide range of materials. Higher Number = Tougher / Resistant to Impact. Lower Number = Harder / Wear Resistant.
Turning Holder for DC Style Positive Inserts. For ...
Description:
Turning Holder for DC Style Positive Inserts. For general external turning operations. Available in left hand or right hand. Positive insert for low depths of cut and finishing applications. Centre scew clamp. Suitable for DC..0702 inserts.
For general internal turning operations. Boring Bar for ...
Description:
For general internal turning operations. Boring Bar for WN Style Negative Inserts. Also available in left hand. Insert style incorporates 6 edges for increased economy. Suitable for WNM.0604 and WN..0804 inserts.
For use with SDJC, SDNCN, SDQC, SDUC, SDZC ...
Description:
For use with SDJC, SDNCN, SDQC, SDUC, SDZC Holders & Bars. Excellent for machining Steel, Stainless Steel and Cast Iron. Acceptable for Super Alloys. Positive Angle.