Door Catches

Door catches are typically used on internal doors, cupboards and general storage solutions to ensure that the doors are held shut. They are typically screw mounted to ensure a secure, long-lasting and reliable installation. Some can be pressed mounted into place, where a structural lip or support can hold the catch in place.

Catches can be fitted at any height on a door however the most common placements are either central often beside the main handle access or split between the top and bottom of a door. This split installation can offer a better closure for a door as the two catches can provide more even pressure across the length of the door while a central lock or latch can also hold creating three hold points on the door.

Materials and finishes

Materials and finishes vary based on the catch application and can be manufactured in a range of solid, robust materials such as brass, steel, reinforced nylon and a range of plastics to ensure it is reliable and has a long service life. Finished acrylic these different material types varies, metal parts can be plated, the plating reduces the requirement of any maintenance and helps to retain its appearance over time.

Types of Door Catches

  • Ball Catch
  • Double Ball Catch
  • Magnetic Catch
  • Pressure Catch
  • Grabber Catch

...
Read more Read less

Filters

Viewing 1 - 20 of 59 products
Results per page
Description Price Catch Type Material Dimensions Catch Fixing Hole Distance Strike Fixing Hole Distance Length Width Fixing Hole Size
RS Stock No. 665-9954
BrandRS PRO
kr 55,608
Each (In a Pack of 4)
Units
- Plastic, Steel - - - - - -
RS Stock No. 124-1901
BrandRS PRO
kr 200,89
Each
Units
- - - - - - - -
RS Stock No. 665-9932
BrandRS PRO
kr 7,828
Each (In a Pack of 4)
Units
- Plastic - - - - - -
RS Stock No. 181-250
BrandRS PRO
kr 108,115
Each (In a Pack of 4)
Units
- - - - - - - -
RS Stock No. 181-244
BrandRS PRO
kr 37,86
Each (In a Pack of 4)
Units
- - - - - - - -
RS Stock No. 124-1900
BrandRS PRO
kr 294,04
Each
Units
- Die Cast Zinc - - - 104.5mm 31.5mm -
RS Stock No. 293-7869
BrandRS PRO
kr 246,35
Each
Units
- Die Cast Zinc - - - - - -
RS Stock No. 161-1953
BrandRS PRO
kr 54,82
Each
Units
Grabber ABS, PC 23.5 x 11.4 x 72 mm, 38.2 x 17 x 43mm 38.2mm 55.0mm 38.2mm 17.0mm 4.3 x 8.3mm
RS Stock No. 124-1903
BrandRS PRO
kr 162,02
Each
Units
- Die Cast Zinc - - - - - -
RS Stock No. 161-1956
BrandRS PRO
kr 68,22
Each (In a Bag of 2)
Units
Grabber Nylon 23.5 x 11.4 x 74 mm, 28 x 13.5 x 48mm 40.5mm 55.0mm 28.0mm 13.5mm 3.4 mm, 3.4 x 8.4 mm, 4.3 x 8.3mm
RS Stock No. 161-1955
BrandRS PRO
kr 54,13
Each
Units
Grabber Nylon 23.5 x 11.4 x 74 mm, 28 x 13.5 x 48mm 40.5mm 55.0mm 28.0mm 13.5mm 3.4 mm, 3.4 x 8.4 mm, 4.3 x 8.3mm
RS Stock No. 161-1954
BrandRS PRO
kr 68,705
Each (In a Bag of 2)
Units
Grabber Nylon 23.5 x 11.4 x 74 mm, 28 x 13.5 x 48mm 40.5mm 55.0mm 28.0mm 13.5mm 3.4 mm, 3.4 x 8.4 mm, 4.3 x 8.3mm
RS Stock No. 341-0343
kr 98,06
Each
Units
Double Ball Brass 50 x 9.5mm 41.0mm 20.0mm 50.0mm 9.5mm 4.0mm
RS Stock No. 278-449
Mfr. Part No.XR-100-1-278-449
kr 66,25
Each (In a Pack of 5)
Units
- - 25.5 x 19.2 x 24.5mm - - 25.5mm 19.2mm -
RS Stock No. 288-8492
Mfr. Part No.V2-0025-52-RS
BrandSouthco
kr 156,385
Each (In a Pack of 2)
Units
- Stainless Steel 82 x 48 x 14.5mm - - 82.0mm 48.0mm -
RS Stock No. 341-0337
kr 85,01
Each
Units
Double Ball Brass 43 x 8.5mm 35.0mm 18.0mm 43.0mm 8.5mm 4.0mm
RS Stock No. 293-7881
Mfr. Part No.16-7-3675
BrandPinet
kr 17,775
Each (In a Pack of 2)
Units
- Plastic - - - - - -
RS Stock No. 341-0359
kr 148,07
Each
Units
Double Ball Brass 60 x 11.5mm 50.0mm 27.0mm 60.0mm 12.0mm 4.0mm
RS Stock No. 288-9489
Mfr. Part No.44-1-1-0-RS
BrandSouthco
kr 137,74
Each
Units
- Steel 44.5 x 22.2 x 32.1mm - - 44.5mm 22.2mm -
RS Stock No. 331-8180
Mfr. Part No.RSH34
BrandAssemtech
kr 17,90
Each
Units
- - - - - - - -