Multimeter Test Leads

Multimeter test leads are considered to be an integral part of electrical measurement, for example connecting your digital multimeter to the unit under test. If the test leads are in poor condition this can lead to inaccurate readings and could result in a health and safety concern if live wires are being read as being de-energised.

A lead kit for measuring high voltage and high energy circuits, such as distribution system voltages (240V- 600V), needs to be in good condition with the proper markings and ratings. You should always take precautionary steps to verify the condition and rating of the leads before testing to ensure safety in the workplace.

There are test lead sets designed to meet the requirements of nearly all applications.

Checks before you start:

  • Confirm that the multimeter and multimeter test leads are rated for the category and voltage level appropriate for the electrical environment they will be used in. Electrical measurement category ratings are defined by the safety standard, IEC61010 and have four ratings, CAT I, CAT II, CAT III and CAT IV.
  • Inspect the leads to make sure they are safe to use and able to conduct electrical signals accurately. This includes checking that the leads are properly insulated with no cracks through the cables and also checking the connectors are clean and debris-free.
  • Complete a visual inspection first then conduct simple ohms measurement to confirm they are electrically reliable and able to carry a signal within allowable loss parameters.

  • ...
    Read more Read less

    Filters

    Viewing 21 - 40 of 164 products
    Results per page
    Description Price Lead Type Product Type Connector Type Fused Lead Length Current Rating Safety Category Voltage Safety Category Minimum Operating Temperature Maximum Operating Temperature Calibrated Safety Category Level
    RS Stock No. 731-5286
    BrandRS PRO
    kr 1 847,44
    1 Kit(s)
    Units
    Multi Pin Connector Test Kit - Crocodile Clip, Pin Socket, Right Angle Plug - 1.2m 20A 1000V CAT II 1000 V - - - CAT II
    New
    RS Stock No. 199-9853
    BrandRS PRO
    kr 124,99
    Each
    Units
    Thin Fine Insulated Prod Set - - No - - - CAT III - - - -
    RS Stock No. 125-3732
    BrandRS PRO
    kr 396,51
    Each
    Units
    Fused Probe Kit - Straight Plug Yes 1.2m - 1000V CAT III 1000 V -10°C +150°C - CAT III
    RS Stock No. 124-7401
    BrandRS PRO
    kr 173,48
    Pr. Set
    Set(s)
    Probe Set - Back Probe Pin - - 10A - - -20°C +70°C - -
    RS Stock No. 125-3730
    BrandRS PRO
    kr 504,18
    Each
    Units
    Test Lead - Crocodile Clip Yes - - - - - - - -
    RS Stock No. 262-7786
    BrandRS PRO
    kr 88,04
    1 Pair(s)
    Pair(s)
    Probe Set - Lantern - - - - - - - - -
    New
    RS Stock No. 199-9854
    BrandRS PRO
    kr 89,51
    Each
    Units
    Extension Lead Set - - No - - - CAT III - - - -
    RS Stock No. 125-3733
    BrandRS PRO
    kr 274,47
    Each
    Units
    Test Lead Kit - Crocodile Clip, Right Angle Plug - 1.2m 15A 1000V CAT III 1000 V - - - CAT III
    RS Stock No. 124-7406
    BrandRS PRO
    kr 197,11
    1 Pair(s)
    Pair(s)
    Test Lead Kit Automotive Long Reach Sharp Prod - - - 20A 1000 V, CAT II - -20°C +70°C - CAT II
    RS Stock No. 175-0162
    BrandRS PRO
    kr 820,50
    Each
    Units
    Test Lead Set Automotive Back Probe - Yes 1.25m 10A 600 V, 1000 V CAT III 600 V, CAT IV 1000 V - - - CAT III, CAT IV
    RS Stock No. 124-7403
    BrandRS PRO
    kr 111,96
    1 Pair(s)
    Pair(s)
    Test Lead Kit Automotive Back Probe - - - 10A - - -20°C +70°C - -
    New
    RS Stock No. 203-5550
    BrandRS PRO
    kr 94,61
    Each
    Units
    Test Lead - 4 mm Banana Plug No 1.5m 10A 1000V CAT III 1000V - - - CAT III
    New
    RS Stock No. 199-9851
    BrandRS PRO
    kr 324,73
    Each
    Units
    Fused Probe Kit - Right Angle to Straight - - - - CAT III - - - -
    New
    RS Stock No. 203-5552
    BrandRS PRO
    kr 94,61
    Each
    Units
    Test Lead - 4 mm Banana Plug No 1.5m - 1000V CAT III 1000V - - - CAT III
    RS Stock No. 124-7405
    BrandRS PRO
    kr 111,96
    1 Pair(s)
    Pair(s)
    Test Lead Kit Automotive Back Probe with Cable Piercer Adapter - - - 10A - - -20°C +70°C - -
    RS Stock No. 124-7404
    BrandRS PRO
    kr 186,44
    1 Pair(s)
    Pair(s)
    Test Lead Kit Automotive Back Probe Lead - - - 10A - - -20°C +70°C - -
    New
    RS Stock No. 203-5551
    BrandRS PRO
    kr 94,61
    Each
    Units
    Test Lead - 4 mm Banana Plug No 1.5m 10A 1000V CAT III 1000V - - - CAT III
    RS Stock No. 741-4358
    Mfr. Part No.TL175
    BrandFluke
    kr 249,26
    Each
    Units
    Test Lead Kit - Shrouded - - 10A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V -20°C +55°C - CAT III, CAT IV
    RS Stock No. 726-3624
    Mfr. Part No.TL75-1
    BrandFluke
    kr 215,27
    Each
    Units
    Test Lead Kit - Banana Plug - 1.22m 10A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V - - - CAT III, CAT IV
    RS Stock No. 412-119
    Mfr. Part No.FLUKE TLK287
    BrandFluke
    kr 1 713,92
    Each
    Units
    Electronic Master Test Lead Kit - Banana Jack, Coupler, Crocodile Clip, Micrograbber, Spade Lug - - 10 A, 2 A, 5 A 1000 V, 300 V CAT II 300 V, CAT III 1000 V - - - CAT II, CAT III
    Related Products
    Safety: CAT II 600 V or CAT III ...
    Description:
    Safety: CAT II 600 V or CAT III 300 V. Pen multimeter for one-handed operation. Ideal for measurement work in cramped spaces3400 digit visual display. Automatic range selection. Display lock (data hold function)Continuity test with beeper. Automatic power off.
    A pocket sized meter with the following features:. ...
    Description:
    A pocket sized meter with the following features:. Clear 3200 count LCD display, incorporating legends to indicate function selected5 functions/16 ranges. Autoranging on volts and resistance ranges up to 450V ac or dc and 32MΩData hold. Continuity test bleeper. Diode ...
    The Fluke t3000 FC Kit includes multimeter, temperature ...
    Description:
    The Fluke t3000 FC Kit includes multimeter, temperature module and accessories. AC and DC voltage measurements to 1000V AC and DC current with 0.01 mA resolution Continuity, resistance, diode test, capacitance and frequency measurements MIN/MAX recording CAT III 1000 V, ...
    The Fluke 3000 FC General Maintenance System lets ...
    Description:
    The Fluke 3000 FC General Maintenance System lets you work on electrical panels faster, safer, easier. Connect the remote modules, view readings from a distance. The Fluke 3000 FC General Maintenance System includes multimeter, i. Flex clamp module, ac voltage ...