Parallels, Surface Finish & Hardness Testers

Parallel testing allows you to test multiple applications or subcomponents of one application to reduce the time. These tests consist of two or more parts that check different components or practical characteristics of an application.
Any machined component has a surface geometry which consists of three basic elements:
● Form or Curvature – whether the surface has irregular bumps or dimensional changes
● Waviness –that depends of the surface that has regular repetitive ripples or patterns
● Roughness – shapes or the irregularities that are smaller than and form part of the waviness pattern
Waviness and roughness are traditionally the most difficult elements to measure when comparing surface finish, however, they have a radical effect on the performance of the finished component. Variations will cause aesthetic appearance changes, component wear variations, oil retention variation etc. Many manufacturers therefore specify a range of roughness values which their components should be manufactured to, often expressed as: Ra, Rq (RMS), RzDIN, Ry, Sm,mm.

We offer:
● Parallel Testers
● Hardness Tester – works by accelerating the internal bounce module against the tested item. Depending on object hardness the kinetic energy of the module is absorbed. Speed reduction is measured and converted to hardness values
● Surface Finish Tester – it is invaluable for tactile and visual inspection of machined component finish

...
Read more Read less

Filters

Viewing 1 - 15 of 15 products
Results per page
Description Price Tester Type Number of Matched Pairs
RS Stock No. 332-0256
BrandRS PRO
kr 2 972,16
Each
Units
Durometer -
RS Stock No. 899-7977
Mfr. Part No.HN-D.
BrandSauter
kr 13 504,37
Each
Units
Leeb -
RS Stock No. 123-0922
BrandRS PRO
kr 2 055,02
Each
Units
Parallels 6
RS Stock No. 899-7974
Mfr. Part No.HMM.
BrandSauter
kr 11 410,67
Each
Units
Leeb -
RS Stock No. 899-8132
Mfr. Part No.TG 1250-0.1FN.
BrandSauter
kr 5 548,31
Each
Units
FN -
RS Stock No. 123-0926
BrandRS PRO
kr 2 251,43
Each
Units
Durometer -
RS Stock No. 264-3520
BrandRS PRO
kr 780,35
Pr. Set
Set(s)
Parallels 10
RS Stock No. 136-3473
Mfr. Part No.HO 2K
BrandSauter
kr 47 108,25
Each
Units
- -
RS Stock No. 235-7544
BrandRS PRO
kr 2 644,64
Each
Units
Surface Comparator -
RS Stock No. 795-9959
Mfr. Part No.811-331-10
BrandMitutoyo
kr 6 060,24
Each
Units
Durometer -
RS Stock No. 136-3545
Mfr. Part No.HB0 100-0.
BrandSauter
kr 1 413,25
Each
Units
- -
RS Stock No. 685-0949
Mfr. Part No.HBD 100-0.
BrandSauter
kr 1 465,59
Each
Units
Durometer -
RS Stock No. 387-0127
BrandRS PRO
kr 926,31
Pr. Set
Set(s)
Parallels 4
RS Stock No. 795-9965
Mfr. Part No.811-334-10
BrandMitutoyo
kr 9 432,92
Each
Units
Durometer -
RS Stock No. 685-0937
Mfr. Part No.HBA 100-0.
BrandSauter
kr 1 099,19
Each
Units
Durometer -
Related Products
Kern Ultrasound hardness testing device is ideally suited ...
Description:
Kern Ultrasound hardness testing device is ideally suited for mobile hardness testing, where the main emphasis is on obtaining rapid and precise results. The SAUTER HO measures using a Vickers Diamond tip, which is pressed into the test piece with ...
A range of premium hand held Coating Thickness ...
Description:
A range of premium hand held Coating Thickness Gauges from Sauter. Designed for use on ferrous or non-ferrous materials. The offset-accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration.Sauter Digital Thickness ...