Heat Guns

Heat Guns are a hand held tool that uses a stream of hot air which is heated by a built-in element at temperatures between 100°C and 550°C. Heavy duty heat guns operate at hotter temperatures of plus 700°C. Heat Guns allow you to concentrate the heat onto a targeted area or surface also give you control using the on and off trigger.If you need advice on how to use these tools, you can consult our Heat Guns Guide.How A Heat Gun Works:The heat used by the Heat Gun is produced by a fan built into the back of the gun within the gun which draws air in and then passes the cold air over the heating elements which then creates the required stream of hot air.How To Use A Heat Gun:Heat Guns should be held at an angle of 45° from the area you target but never hold the stream of heated air in one place for more than a few seconds as you could damage and burn your work surface. When stripping paint from a surface use the Heat Gun to soften the paint until it bubbles and blisters. Remove the Heat Gin from the surface then use a scraper to remove the paint from the work surface.Uses for Heat Guns:
  • Stripping Paint including lead paint (lead paint, use temperatures below 590° minimising vaporisation)
  • Heat Shrink Tubing
  • Shrink Film
  • Shrink Wrap Packaging
  • Wood - helps to dry out damp wood
  • Plastic – assists help in welding, bending and shaping plastic
  • Adhesive softening
  • Thawing frozen pipes
  • Electronics – De-soldering
  • Rework surface-mounted circuit boards

...
Read more Read less

Filters

Viewing 1 - 20 of 30 products
Results per page
Description Price Maximum Airflow Wattage Voltage Rating Maximum Operating Temperature Plug Type Outlet Diameter Weight Model Number
RS Stock No. 522-2198
Mfr. Part No.012700
BrandSteinel
kr 1 283,54
Each
Units
500L/min 2.3kW 230V +650°C Type C - EuroPlug 34mm 940g HG2320E
RS Stock No. 315-3387
Mfr. Part No.3501542
BrandSteinel
kr 4 795,20
Each
Units
800L/min 3.4kW 230V +600°C Type C - EuroPlug 50mm 1.2kg HG5000E
RS Stock No. 814-0434
Mfr. Part No.D26411
BrandDeWALT
kr 921,27
Each
Units
450L/min 1.8kW 240V ac +600°C Type C - EuroPlug - 800g D26411
RS Stock No. 520-2914
Mfr. Part No.009663
BrandSteinel
kr 1 228,50
Each
Units
500L/min 2.3kW 240V +650°C Type G - British 3-pin 34mm 940g HG2320E
RS Stock No. 764-6672
Mfr. Part No.GHG 600 CE
BrandBosch
kr 1 180,86
Each
Units
550L/min 2kW 230V ac +600°C Type C - EuroPlug - 600g -
RS Stock No. 909-4183
Mfr. Part No.008390
BrandSteinel
kr 583,55
Each
Units
450L/min 1.6kW 230V +500°C Type C - EuroPlug 34mm 670g HL1620S
RS Stock No. 126-0341
Mfr. Part No.HG5012K
BrandMakita
kr 790,66
Each
Units
350-500m³/min 1.6kW 230V +500°C Type C - EuroPlug - 680g HG5012K
RS Stock No. 104-367
Mfr. Part No.21898000
BrandRapid
kr 601,54
Each
Units
500L/min 2kW 220 → 240V ac +600°C Type C - EuroPlug - 1.2kg -
RS Stock No. 124-5158
BrandRS PRO
kr 560,60
Each
Units
500L/min 2kW 220 → 240V +550°C Type C - EuroPlug, Type G - British 3-pin - 750g -
RS Stock No. 445-3436
Mfr. Part No.6966EK
BrandWeller
kr 2 113,48
Each
Units
- 250W 240V ac +427°C Type F - Schuko plug - 368g 6966E
RS Stock No. 520-2920
Mfr. Part No.012694
BrandSteinel
kr 1 341,76
Each
Units
500L/min 1.4kW 110V +650°C BS 4343 34mm 940g HG2320E
RS Stock No. 875-4691
Mfr. Part No.351052
BrandSteinel
kr 7 746,65
Each
Units
100L/min 300W 36V dc +400°C Type C - EuroPlug, Type G - British 3-pin 9mm 1.8g BHG360
RS Stock No. 124-5159
BrandRS PRO
kr 518,50
Each
Units
550L/min 1.6kW 240V +500°C Type C - EuroPlug - 750g -
RS Stock No. 122-4309
Mfr. Part No.3518091
BrandSteinel
kr 6 767,84
Each
Units
500L/min 2.3kW 230V +700°C Type C - EuroPlug 30mm 840g HG2620E
RS Stock No. 489-541
Mfr. Part No.HG651CK
BrandMakita
kr 1 807,22
Each
Units
550m³/min 2kW 240V ac +650°C Type C - EuroPlug - 780g HG651CK
RS Stock No. 125-3761
Mfr. Part No.008413
BrandSteinel
kr 984,42
Each
Units
500L/min 1.8kW 230V +600°C Type C - EuroPlug 34mm 804g HL1820
RS Stock No. 146-8764
Mfr. Part No.SLS.GKIT1-GUN
BrandFacom
kr 6 419,59
Each
Units
- - - - - - - SLS.G
RS Stock No. 325-3190
Mfr. Part No.3501541
BrandSteinel
kr 4 792,31
Each
Units
800L/min 3.4kW 230V +600°C Type G - British 3-pin 50mm 1.2kg HG5000E
RS Stock No. 181-6798
Mfr. Part No.06012A6360
BrandBosch
kr 1 814,40
Each
Units
150 → 300/150 → 500L/min 1.4kW 110V +650°C BS 4343 - 670g GHG 23-66
RS Stock No. 827-4381
Mfr. Part No.D26414
BrandDeWALT
kr 1 281,18
Each
Units
650L/min 2kW 240V ac +600°C Type C - EuroPlug - 850g D26414
Related Products
Quickly transforms a quick-release coupling into a safety ...
Description:
Quickly transforms a quick-release coupling into a safety blowgun. Direct connection to all 6-mm diameter Stäubli compressed air quick-release couplings for fast, easy incorporation into your installation.Coupling acts as blowgun handle.Practical. Blowgun can easily be hung on the parking bracket, ...
Smart. Heat Power on Demand Technology. Patented Connection ...
Description:
Smart. Heat Power on Demand Technology. Patented Connection Validation IMC Formation Technology2.8” colour touchscreen with bold graphics. Communications Port for process traceability data and firmware graphics. Precise tip temperature display. Integrated Net Power Meter and power graph. Patented ...
The Metcal MX-500 Soldering, Desoldering & Rework System ...
Description:
The Metcal MX-500 Soldering, Desoldering & Rework System handles both SMT and through-hole soldering/rework with one power supply., Two switchable outputsSMT/De-soldering/Rework station, allowing quick removal and replacing of components. Requires 60-100psi air supply40W rating at 22°C (72°F) ambient. Operating ...
Electric fastener for staples and brad nails. Ergonomic ...
Description:
Electric fastener for staples and brad nails. Ergonomic soft grip handle for comfort. Accepts heavy duty staples up to 14mm and brads up to 15mm. Easy access staple & brad insertion for quick loading. Hi/Lo adjustment for wide range of ...