Screw Extractors

A screw extractor is a tool for removing broken, damaged or seized screws. They can be driven manually using adjustable spanners or vice grip pliers or by using a hand-held power tool.

Why use a Screw Extractor?

Screws can break, rust or become stripped and need to be replaced. This brings any work or project to a halt. The easiest way to remove the screws before replacing with a new one, is to use a specialist tool such as a screw extractor. The screw extractors are similar to a screw but have a reverse thread.

How to remove a screw using a screw extractor

Always select a drill bit that is slightly smaller than the screw you want to remove.

Attach to the drill

Line the drill bit up with the centre of the screw

Work slowly to drill a hole for the extractor

Place the spiral end of the extractor into the hole you have drilled.

Twist the extractor anti clockwise until you cannot turn it anymore

Twist the extractor with a wrench or drill. Grip the top of the screw extractor with a wrench. Twist it anti clockwise until the screw comes free.

If using a drill, attach the free end of the extractor to the drill, set to rotate in reverse and turn it on to turn the screw anti clockwise

Remove the screw using pliers


...
Read more Read less

Filters

Viewing 1 - 10 of 10 products
Results per page
Description Price Number of Pieces Set Contents Material Case Material
RS Stock No. 460-9516
BrandRS PRO
kr 114,10
Each
Units
5 No 1; No 2; No 3; No 4; No 5 Chrome Vanadium Steel Plastic
RS Stock No. 446-863
BrandRS PRO
kr 473,35
1 Box of 1
Box(es)
12 HSS Fully Ground Jobber Drills (x6); 2.5; 3.3; 4.2; 5; 6.8 mm HSS Plastic
RS Stock No. 710-0630
BrandRS PRO
kr 81,02
Each
Units
3 No 1; No 2; No 3 Steel -
RS Stock No. 282-855
Mfr. Part No.9500B
kr 1 198,93
Each
Units
10 1/8; 3/16; 7/32; 5/16; 3/8; 7/16; 17/32; 5/8; 3/4; 1 in Carbon Steel -
RS Stock No. 423-6685
BrandRS PRO
kr 82,90
Pr. Set
Set(s)
5 1/4; 5/16; 3/8; 7/16; 1/2 in Steel -
RS Stock No. 769-1779
Mfr. Part No.285.J10PB
BrandFacom
kr 1 774,46
Each
Units
11 - - Plastic
RS Stock No. 282-833
Mfr. Part No.69X00
kr 777,82
Each
Units
10 7 mm to 1/4 to 9/32 in; 3 to 3/4 in; 1 5/16 in; 7 in; 0.86 8 mm to 5/16 in; 9 mm to 11/32 in; 3/8 in; 10 mm; 11 mm to 7/16 in; 12 mm; 13 mm to 1/2 in; 14 mm to 9/16 in; 15 mm to 16 mm to 5/8 in - -
RS Stock No. 492-311
Mfr. Part No.422003
BrandCK
kr 147,64
Each
Units
2 6 → 10; 12 → 14 mm HSS -
RS Stock No. 446-853
BrandRS PRO
kr 84,47
1 Set of 1
Set(s)
5 2.5; 3.3; 4.2; 5; 6.8 mm Alloy Steel Plastic
RS Stock No. 264-2230
Mfr. Part No.9500A
BrandStanley
kr 334,97
Each
Units
5 1/8; 3/16; 7/32; 5/16; 3/8 in Alloy Steel -
Related Products
Professional range of 2 piece PC screw extractor ...
Description:
Professional range of 2 piece PC screw extractor sets complete with wallet. Metric or Imperial sizes.Screw extractors sandblasted or black & white finish.
Fully compatible with the rest of the cases ...
Description:
Fully compatible with the rest of the cases in the range, the contents have been specially selected for industrial users.
Chrome vanadium steel sockets with steel screwdriver bits. ...
Description:
Chrome vanadium steel sockets with steel screwdriver bits. Hardened and tempered for heavy duty use. Supplied complete on a rail retaining bar which can be wall mounted or used within a roller cabinet. Two sets are available, a 7 piece ...
Wera Bi. Torsion bits have special heat treated ...
Description:
Wera Bi. Torsion bits have special heat treated torsion zone that has a lower hardness than the shaft tip. The peak loads are cushioned preventing premature breakage and distinctly extend the service life. Wera Bi. Torsion bits are recognisable through ...