Mecalectro Magnetic Lock, 790N

  • RS Stock No. 236-9317
  • Mfr. Part No. 5.82.01
  • Brand Mecalectro
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

Supporting electromagnets

These devices are designed for supporting or gripping ferromagnetic parts.
The maximum retaining force is obtained by contact with flat mild steel parts, with a surface area equal to or greater than the attraction surface, and with a sufficient thickness (equal to at least 1/8th of the diameter ofthe electromagnet).
Any gap, no matter how small, will noticeably reduce this maximum force.

//media.rs-online.com/t_line/LF236929-10.gif
Specifications
Attribute Value
Holding Force 790N
Supply Voltage 24V dc
Length 27mm
Discontinued product
Related Products
Operating voltage: 12 or 24Vdc. Brushed aluminium. Current ...
Description:
Operating voltage: 12 or 24Vdc. Brushed aluminium. Current draw: 500mA at 12Vdc x 2 (at 20°C)Magnetic bond sensor monitor output remotely monitors the door lock or unlock status.Operating temperature: -10 to 55°C (14 to 131°F)Humidity: 0 to 95% non-condensing. Lock’s ...
Power input: 24Vdc. Voltage tolerance: +/-15%Current draw: 60mA ...
Description:
Power input: 24Vdc. Voltage tolerance: +/-15%Current draw: 60mA at 24Vdc (at temperature 20 °C)Holding force: Up to 100lbs. Dimensions: 85x85x35mm (Lock)Dimensions: 65x65x40mm (Armature plate)Over-ride switch. Brushed stainless steel.
Operating voltage: 12 or 24Vdc. AluminiumCurrent draw: 500mA ...
Description:
Operating voltage: 12 or 24Vdc. AluminiumCurrent draw: 500mA at 12Vdc250mA at 24Vdc (at temperature 20 °C)(SPDT rated 3A at 12Vdc)Status LED lights. Operating temperature: -10 to 55 °C (14 to 131 °F)Humidity: 0 to 95% non-condensing. Lock’s surface temperature: Current ...
Electrical current is required to turn the magnet ...
Description:
Electrical current is required to turn the magnet ON. Power is removed to turn the magnet OFF. Free leads, two-pole connector, Hirschman connector. Threaded hole/s in rear face of magnet. Bright nickel plated with machined face.