Texas Instruments BQ27410DRZT-G1, Battery Fuel Gauge IC, 2.7 → 5.5 V 12-Pin, SON

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Impedance Track™ Battery Charge Monitors, Texas Instruments

The Li-ion battery charge monitors use the patented Impedance Track™ algorithm for battery fuel gauging, and provide information such as remaining battery capacity (mAh), state-of-charge (%), and battery voltage (mV). It minimises dependence on host processor and improves standby power.

Safety protections such as over/under-​temperature, extra levels of over/under-voltage, discharge short circuit, charge overcurrent
Autonomously measures all cell voltages, integrated pack current and temperature every 1 second
Capacity Indication with advanced algorithms
Accurate battery State-Of-Health (SOH) enables accurate prediction of available capacity
Smart charging and adaptability

Battery Management, Texas Instruments

Specifications
Attribute Value
Mounting Type Surface Mount
Package Type SON
Pin Count 12
Length 4.15mm
Typical Operating Supply Voltage 2.7 → 5.5 V
Dimensions 4.15 x 2.6 x 0.95mm
Width 2.6mm
Height 0.95mm
Maximum Operating Temperature +85 °C
Maximum Output Current 16mA
Maximum Output Voltage 2.6 V
Minimum Operating Temperature -40 °C
Minimum Output Voltage 2.4 V
Discontinued product
Related Products
Fast-Charge NiMH or Ni. Cd Batteries. Voltage Slope, ...
Description:
Fast-Charge NiMH or Ni. Cd Batteries. Voltage Slope, Temperature, and Timer Fast-Charge Cutoff. Charge 1 to 16 Series Cells. Supply Battery's Load While Charging (Linear Mode)Fast Charge from C/4 to 4C RateC/16 Trickle-Charge Rate. Automatically Switch from Fast to Trickle ...
Precision Voltage, Temperature, and Current Measurement System. Available ...
Description:
Precision Voltage, Temperature, and Current Measurement System. Available Capacity Estimated from Coulomb Count, Discharge Rate, Temperature, and Cell Characteristics. Estimates Cell Aging Using Learn Cycles. Uses Low-Cost Sense Resistor. Allows for Calibration of Gain and Temperature Coefficient. Li+ Safety ...
High Accuracy±0.5mV (max) Cell Voltage Error. Simultaneous Cell ...
Description:
High Accuracy±0.5mV (max) Cell Voltage Error. Simultaneous Cell Voltage Sampling. Self-Calibration Integrated Diagnostics. Open-Wire and Short Fault Detection. Undervoltage/Overvoltage Warning. Thermal Shutdown High FlexibilitySPI Interface12-Cell and 16-Cell Versions+6V Minimum (3 Cells) Operation+0.5V to +4.5V ...
Use for wide voltage inputs designs up to ...
Description:
Use for wide voltage inputs designs up to 75V, and a balance between ease of use and flexibility. Input Voltage up to 42V (LMRx42xx), 20V (LMRx20xx), and 5.5V (LMRx05xx)Output Current up to 2A (LMRxxx20), 1.5A (LMRxxx15), 1A (LMRxxx10), etc.Adjustable output ...