Laird Technologies BISMS02BI-01 Bluetooth Chip 2.0

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

BISM02 Bluetooth 2.0 Wireless Transceiver module

The BISM02BI-01 Module provides a robust and reliable Bluetooth connection along with a simple AT command based programming interface.

Bluetooth 2.0 Class 1 device
RF Frequency Range: 2.40 to 2.485GHz ISM band
RF Output Power: up to +6dBm
Receiver Sensitivity: -86dB
Range: up to 250m (Line of Sight)
Supports AT command-based single-point operation
Supports multipoint firmware using a simple packet-based protocol but requires a host to function effectively
Audio can be transferred over SCO channels through the PCM interface at 64kbps
Profile support: Generic Access Profile (GAP), Service Discovery Profile (SDAP), Serial Port Profile (SPP), Dial-up Networking Profile (DUN), Head-Set Profile (HSP), Hands-Free Profile (HFP) and Audio Gateway
Low-Power modes
PCM CODEC interface
Host communication: serial UART with RTS/CTS flow control
6 x GPIO
8-bit ADC
Chip antenna
Power supply: +3.2V to +7.0Vdc
Operating temperature range: -40 to +85°C
Dimensions: 17.7 x 46.0 x 5.0mm
Applications: Wireless headsets, Handsfree phones

Specifications
Attribute Value
Bluetooth Class Class 1
Bluetooth Version 2.0
Receiver Sensitivity -86dBm
Supported Bus Interfaces UART
Supported I/O Interfaces RS232
Dimensions 46 x 17.7 x 4.82mm
Height 4.82mm
Length 46mm
Maximum Operating Temperature +85°C
Minimum Operating Temperature -40°C
Width 17.7mm
Discontinued product
Related Products
Panasonic’s new PAN1326C is a Host Controlled Interface ...
Description:
Panasonic’s new PAN1326C is a Host Controlled Interface (HCI) Bluetooth RF module that brings Texas Instrument’s seventh generation Bluetooth core integrated circuit, the CC2564C, to an easy-to- use module format. The PAN1326C is Bluetooth-4.2 compliant and it offers best-in-class RF ...
The PAN1740 is a short-range BLE single mode ...
Description:
The PAN1740 is a short-range BLE single mode module used for the implementation of Bluetooth functionality into various electronic devices. Pre-programmed BT/MAC address. Includes 16 MHz and 32 768 k. Hz crystal calibrated up to 1 ppm Single-mode Bluetooth Smart ...
The ATSAMB11 is an ultra-low power Bluetooth® Low ...
Description:
The ATSAMB11 is an ultra-low power Bluetooth® Low Energy System on a Chip with Integrated MCU, Transceiver, Modem, MAC, PA, TR Switch, and Power Management Unit (PMU). It is a standalone ARM® Cortex®-M0 applications processor with embedded Flash memory and ...
The RN52 Bluetooth audio module provides a fully ...
Description:
The RN52 Bluetooth audio module provides a fully integrated solution for delivering high-quality stereo audio in a small form factor. It combines a Class 2 Bluetooth radio with an embedded DSP processor, controlled and configured by simple ASCII commands and ...