Cypress Semiconductor CYBLE-014008-00 Bluetooth Chip 4.1

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

CYBLE-014008-00 EZ-BLE Bluetooth Module

The CYBLE-014008-00 module contains all the necessary components to add low-power Bluetooth BLE wireless connectivity to a project design. It includes a royalty-free BLE stack compatible with the Bluetooth 4.1 standard. PSoC Creator™ provides an integrated design environment (IDE) to configure, develop, program and test a BLE application.

CY8C4 48MHz Cortex-M0 core PSoC4 with 128KB Flash memory, 16KB RAM
RF Frequency Range: 2400 to 2482MHz ISM band
RF Power Output: up to +3dBm
Receiver Sensitivity: -89dBm
OTA Data Rate: 1Mbps
Up to 25 x GPIO
CapSense™ Sigma-Delta touch sensing with SmartSense™ hardware tuning
8-channel 12-bit, 1Msps ADC with internal reference, sample-and-hold (S/H) and channel sequencer
2 x current DACs (IDACs) for general-purpose or capacitive sensing applications on any pin
Low-power comparator that operates in Deep-Sleep mode
2 x serial communication blocks (SCB) supporting I²C (master/slave), SPI (master/slave), or UART
LCD drive supported on all GPIOs (common or segment)
4 x programmable logic blocks called universal digital blocks, (UDBs), each with eight macrocells and datapath
4 x configurable operational amplifiers
PCB antenna
Bluetooth Smart Radio and Subsystem (BLESS) contains Physical Layer (PHY) and Link Layer (LL) engines
Embedded AES-128 security engine
BLE protocol stack supporting generic access profile (GAP) Central, Peripheral, Observer and Broadcaster roles
Standard BLE profiles and services
Power modes: Active, Sleep, Deep Sleep, Hibernate and Stop
Power supply +1.8V to +5.5Vdc
Operating temperature range: -40 to +85°C
Dimensions: 11 x 11mm, SMT format
Applications: Short range communication for the Internet of Things (IoT)

Note

An evaluation board is available under RS Part No. 124-4198.

Approvals

CE, FCC, IC, MIC, KC

Specifications
Attribute Value
Bluetooth Version 4.1
Maximum Output Power +3dBm
Receiver Sensitivity -87dBm
Supported Bus Interfaces I2C, SPI, UART
Supported I/O Interfaces Serial
Dimensions 11 x 11 x 1.8mm
Height 1.8mm
Length 11mm
Maximum Operating Temperature +85°C
Minimum Operating Temperature -40°C
Width 11mm
150 In stock for delivery within 1 working days
Price Each
kr 135,89
(exc. VAT)
kr 169,86
(inc. VAT)
Units
Per unit
1 - 4
kr 135,89
5 +
kr 127,82
Packaging Options:
Related Products
The SPBT2632C1A.AT2 is an easy and ready-to-use Bluetooth ...
Description:
The SPBT2632C1A.AT2 is an easy and ready-to-use Bluetooth V3.0 module to enable wireless connectivity. The complete RF module supports transmission speeds up to 560 kbps in SPP service, and 250 kbps in iAP service with AT2 command set. It has ...
The ATSAMB11-ZR is an ultra-low power, fully certified ...
Description:
The ATSAMB11-ZR is an ultra-low power, fully certified Bluetooth® Low Energy module with Integrated ARM® Cortex®-M0 MCU and application Flash memory. BluSDK Smart supports application profiles such as Proximity, Thermometer, Heart Rate, Blood Pressure, and many others. The qualified Bluetooth ...
Description:
Module size: 11.0 mm ´ 11.0 mm ´ 1.80 mm (with shield)Bluetooth 4.1 single-mode module. Industrial temperature range: –40 °C to +85 °C32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz256-KB flash memory, 32-KB SRAM ...
Proven hardware design ready to use. Dual-mode operation ...
Description:
Proven hardware design ready to use. Dual-mode operation eliminates the need for multiple modules. Cost optimized for applications without space constraints. Nonvolatile memory for self-sufficient operation and Over-the-air updates. Fully certified module eliminates the time needed for design, development and ...