Legrand Cantilever Arm Bracket Pre-Galvanised Steel Cable Tray Fixing Plate, 75 mm Width, 65mm Depth

  • RS Stock No. 163-3068
  • Mfr. Part No. LCA75PG
  • Brand Legrand
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with a bottom flange on arms 225 mm wide and above for extra strength Supplied singly without fasteners

Specifications
Attribute Value
Accessory Type Cantilever Arm Bracket
Material Pre-Galvanised Steel
Tray and Basket Type Cable Tray
Width 75 mm
For Use With Flat Surface Tray, Swiftrack Channel
Duty Type Heavy Duty, Light Duty, Medium Duty
Depth 65mm
Series LCA
4 In stock for delivery within 1 working days
Price Each
kr 42,77
(exc. VAT)
kr 53,46
(inc. VAT)
Units
Per unit
1 - 9
kr 42,77
10 +
kr 38,55
Related Products
Bends, risers, tee pieces, and couplers The bends ...
Description:
Bends, risers, tee pieces, and couplers The bends and risers are adjustable between 0° and 90° The coupler set will join two lengths of tray.
PVC cable tray covers available in lengths of ...
Description:
PVC cable tray covers available in lengths of 3 metres. Easy to install. Eco-friendly: PVC is 100% recyclable. Can be installed inside and outside. Suitable for use in chemical or petrochemical industries, paper or food processing. Suitable for use in ...
PVC couplers for PVC cable tray. Straight coupler: ...
Description:
PVC couplers for PVC cable tray. Straight coupler: RS 125-1633; hinged coupler: RS 125-1634. Easy to install. Eco-friendly: PVC is 100% recyclable. Can be installed inside and outside. Suitable for use in chemical or petrochemical industries, paper or food processing. ...
There are three alternative methods of fitting trapeze ...
Description:
There are three alternative methods of fitting trapeze hangers to threaded rods as shown below. All three methods are applicable to trapeze hangers for–600-900“€€mm widths but only type ‰ applies to narrower trapeze hangers. The recommended safe working load for ...