Ceramic Heating Element, 122mm, 150 W, 230 V ac

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Ceramic Heating Elements

These heating elements are extremely energy efficient converting 96% of the input power to heat with a maximum temperature of 700ºC

5000 - 10,000 hours working life Available in two sizes and with or without integral type K thermocouple for monitoring and control
Heating wire embedded into concave shaped heater creates infrared in parallel rays
230V ac supply
Suitable for long wave radiation, curing, heating and drying
Thermocouple included with RS Stock Numbers - 376-2688, 376-2694 and 376-2701

Note

Stock Item 376-2672 has a built in Thermocoupler and is 4 wire.

Multi-Purpose Process Heaters

In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.

Warning

  • These heaters shall only be used where adequate electrical, thermal and mechanical barriers are provided to prevent access to hazardous parts without the use of a tool.
Specifications
Attribute Value
Heating Element Form Curved Ceramic Element
Power Rating 150 W
Supply Voltage 230 V ac
Length 122mm
Width 60mm
Thickness 35mm
Dimensions 122 x 60 x 35 mm
5 In stock for delivery within 1 working days
Price Each
kr 237,10
(exc. VAT)
kr 296,38
(inc. VAT)
Units
Per unit
1 +
kr 237,10
Related Products
The ACIM Jouanin flat bracket 750W strip heater ...
Description:
The ACIM Jouanin flat bracket 750W strip heater is designed to heat air or gas by natural or forced convection. This blade resistor heater can be heated up to a peak temperature of 200°C. Note:To obtain optimum performance from these ...
In order to obtain optimum performance from these ...
Description:
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them. Designed to provide localised heat to a restricted work area requiring close thermal control. Cartridge heaters have low/moderate ...
Formable heating resistors can take on any shape ...
Description:
Formable heating resistors can take on any shape after forming and may therefore be used to replace faulty specific resistors, or in a normal capacity on injection nozzles, sheaths and cylindrical parts.The internal bend radius is 8 mm for the ...
Preformed silicone heater mats are thin and lightweight ...
Description:
Preformed silicone heater mats are thin and lightweight and have a low thermal mass, hence their rapid heat up characteristics and fast response to temperature control. The mats wide operating temperature range, flexibility and superb electrical properties give them a ...