Fluke 345 Clampmeter, Max Current 1.4kA ac, 2000A dc CAT IV 600 V With RS Calibration

  • RS Stock No. 327-784
  • Mfr. Part No. Fluke 345
  • Brand Fluke
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): MY
Product Details

Fluke 345 Power Quality Clamp Meter

The Fluke 345 measures a wide range of electrical parameters for troubleshooting power disturbances in single- and three phase electrical loads. With a bright colour display to see waveforms and trends, a low-pass filter to remove high frequency noise, and a high EMC immunity design, the Fluke 345 is ideal for measurements on switching loads such as variable speed drives, electronic lighting and UPS systems.

Clamp-on measurement of ac current up to 1400A rms and dc current up to 2000A without breaking the circuit
Low pass filter ensures the clamp meter is accurate in noisy environments even with distorted waveforms present on electronic loads
Identify intermittent faults by logging any power quality parameter for minutes, or over a month, including harmonics
Direct measurement of dc ripple (%) for battery and dc systems
Analyse and log harmonics digitally or graphically
Inrush current measurement to capture and analyse nuisance tripping, from 3 to 300 seconds
Large backlit colour display of waveforms (scope function) and trends
Balanced 3-phase power measurement capability
Power Log software supplied to view graphs and generate reports on a PC
USB interface
Harmonic analysis: Analyse, display and log harmonics up to the 30th harmonic (40th harmonic for 15Hz to 22Hz)
Verify batteries: Direct measurement of dc ripple (%) for battery and dc systems
EN61010 safety rating: 600V CAT IV / 1000V CAT III rated for use at the service entrance

Supplied with

Test Leads, Power Log software on CD-ROM, USB lead, batteries(fitted), mains adaptor, carry case & instructions.

Fluke Power Quality Clamp Meter

The Fluke power quality clamp meter is the ideal meter for commissioning and troubleshooting modern electrical loads. With a bright colour display to analyse the harmonic spectrum, a low-pass filter to remove high-frequency noise, and a high EMC immunity design, the Fluke 345 is ideal for measurements on switching loads such as variable frequency drives, electronic lighting and UPS systems. Additionally, the Hall Effect measurement system makes the measurement of DC possible without the need to break the circuit, and the internal memory enables long-term logging for analysis of trends or intermittent problems. Clamp-on measurement of AC up to 1400A RMS and DC up to 2000A without breaking the circuit. This meter contains test leads, power log software on CD-ROM, USB lead, batteries (fitted), mains adaptor, carry case and instructions.

Features and Benefits

Voltage measurement is 825V AC/DC Minimum, maximum, average and inrush recording to capture variations automatically Logs any power quality parameter, including harmonics for minutes or for over a month to help identify intermittent faults The low-pass filter to smooth out noisy loads and stabilize readings Verifies batteries with direct measurement of DC ripple (%) for battery and DC systems Analyses and logs harmonics digitally or graphically Downloads logged data via USB with Power Log application software making it easy to view trends and screenshots, analyse and create reports Powers the instrument without using the battery when performing extended logging sessions Provides built-in three-phase power measurement capability for balanced loads USB interface Display HOLD Operating temperature ranges between 0°C and 50°C

Applications

Set up and troubleshoot variable frequency drives and UPS systems Harmonics measurement Inrush capture Load studies

Certifications

CE cCSAus IEC/EN 61326-1:1997 class B IEC/EN 61326-1:1997 CAT IV 600V safety rating

Specifications
Attribute Value
Absolute Maximum AC Current Measurement 1.4kA ac
Absolute Maximum DC Current Measurement 2000A dc
Absolute Maximum AC Voltage Measurement 825V ac
Absolute Maximum DC Voltage Measurement 825V dc
Model Number 345
Calibrated RSCAL
AC Current Measurement Resolution 10mA ac
DC Current Measurement Resolution 10mA dc
Best DC Current Accuracy ±1.5% + 5 Digits
Clamp Meter Type Current, Frequency, Harmonics, Kilowatt Hour, Power, Power Factor, Voltage
Best AC Current Accuracy ±1.5% +5 digits
Best AC Voltage Accuracy ±1.5% + 5 Digits
Best DC Voltage Accuracy ±1.5% + 5 Digits
Safety Category CAT IV 600 V
Display Type LCD
Power Source Battery
Maximum Operating Temperature +50°C
Length 300mm
DC Voltage Measurement Resolution 1mV dc
Functions Measured AC Current, AC Voltage, DC Current, DC Voltage, Frequency, Harmonics, Kilowatt Hour, Power, Power Factor, VAR, Voltage
Maximum Conductor Size 58mm
True RMS Yes
Minimum Operating Temperature 0°C
Height 52mm
AC Voltage Measurement Resolution 1mV ac
Battery Life 10 (Backlight On) h, 12 (Backlight Off) h
Weight 820g
Safety Category Level CAT IV
Safety Category Voltage 600V
Battery Type AA
Width 98mm
Dimensions 300 x 98 x 52mm
12 In stock for delivery within 3-5 working days
Price Each
kr 15 555,00
(exc. VAT)
kr 19 443,75
(inc. VAT)
Units
Per unit
1 +
kr 15 555,00
Not available for next day delivery
Related Products
TRMS AC or AC / DC clip-on multimeters, ...
Description:
TRMS AC or AC / DC clip-on multimeters, 10000-count dual display, 600 V CAT IV.The dual display of these clamps enables voltage and current measurements to be viewed simultaneously.Functions: HOLD, AUTO-HOLD, MIN, MAX, Peak, Ø Zero.For measuring current, voltage, frequency, ...
Save money when you buy the ICM139 Clampmeter, ...
Description:
Save money when you buy the ICM139 Clampmeter, RS1327K IR Thermometer and the RS9010 Phase Rotation Indicator together in this great value bundle. 4000 Count backlit digital display with analogue bargraph True RMS reading on ac mode Nickel Steel alloy ...
The FLIR high-quality voltage, continuity and current testers ...
Description:
The FLIR high-quality voltage, continuity and current testers have 200A/1000V measuring range. This electrical tester is ideal for electricians who troubleshoot and verify electrical system. They feature an optimized, open-jaw design that can fit into tight spaces and reliably measure ...
The Megger clamp meter measures up to 1500A ...
Description:
The Megger clamp meter measures up to 1500A AC-DC. It offers voltage measurement of 750VAC and 1000VDC, making it ideal for use in the installation, maintenance, monitoring or checking of large AC-DC electrical systems and equipment. The large clear digits ...