RS PRO Clearance Gauge, 0.025 → 0.175 mm

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details


RS Pro plasticgauge provides a simple effective method for the measurement of clearance between fitted surfaces. Ideal for use with mains bearings, pipe flanges, head gasket, high spots, housings, injection moulding tools or where a feeler gauge cannot be inserted.

Can highlight, clearance, lobing, ovality on shafts
Volumetric measurement takes surface roughness into account
Calibration card supplied
Clearance measurement 0.001in. to 0.020in. (0.025 to 0.5mm) can be taken.
Non corrosive and oil soluble


Care must be taken when measuring gaps below 0.00025in. (0.06mm) to achieve results.

Supplied with

Plastigauge is supplied in packs to suit clearance ranges. Care should be taken to select the correct range type.

Attribute Value
Maximum Measurement 0.175mm
Minimum Measurement 0.025mm
336 In stock for delivery within 1 working days
Price 1 Box of 10
kr 59,81
(exc. VAT)
kr 74,76
(inc. VAT)
Per Box
Per unit*
1 +
kr 59,81
kr 5,981
*price indicative
Related Products
The SKF 729865 series feeler gauges have been ...
The SKF 729865 series feeler gauges have been designed for accurate bearing clearance measurement. These feeler gauges can be used to measure the internal clearance when adjusting spherical roller bearings. • Highly accurate measurement• 729865 A is supplied with protective ...
Hardened and ground base. Ground "V" groove in ...
Hardened and ground base. Ground "V" groove in base for mounting on cylindrical work. Retractable pins provided in the base for work against edge of flat surface. Double ended scriber with hardened points. Fine adjustment of spindle may be made ...