FLUKE i310S Current Probe & Clamp

  • RS Stock No. 401-422
  • Mfr. Part No. FLUKE I310S
  • Brand Fluke
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CN
Product Details

Fluke i310s AC/DC Current Clamp

The i310s Current Clamp has been designed for use with oscilloscopes and digital multimeters for accurate nonintrusive measurement of AC, DC and complex waveform currents.

Using Hall Effect technology, the clamp can accurately measure currents up to 450 A peak over the frequency range of dc to 20 kHz
These features make it a powerful tool for use in inverters, switch mode power supplies, industrial controllers, automotive diagnostics, and other applications requiring current measurements and/or waveform analysis
Output cable and connections: Safety BNC connector supplied with safety 4 mm adapter
Power Supply: 9 V Alkaline, NEDA 1604/PP3 IEC 6LR61
Safety Standards: EN 61010-1: 2001, EN 61010-2-032: 2002, EN 61010-031: 2002
300 V rms Category III, Pollution Degree 2

Fluke AC/DC Current Clamp

The Fluke i30s AC/DC current clamp has a current rating of 300AAC and 450ADC. It is a state of the art device used with oscilloscopes and digital multimeters for accurate non-intrusive measurement and complex waveform currents.

Features and Benefits

• Output cable and connections :safety BNC connector supplied with safety 4mm adapter
• Power supply is a 9V alkaline
• Low battery indicator
• Zero adjustment
• Output sensitivity: 10mV/A (40A) to mV/A (400A)
• Resolution: ±50mA (40A) to ±100mA (400A)
• Load impedance is greater10kohms and 100pF
• Frequency range (small signal): DC to 20kHz (-3dB)
• Phase shift below 1kHz, less than 2 degrees
• Temperature coefficient: ±0.1% of reading /°C

Applications

• Inverters
• Switch mode power supplies
• Industrial controllers
• Automotive diagnostics
• Other applications requiring current measurements
• Waveform analysis

Certifications

• EN 61010-1: 2001
• EN 61010-2-032: 2002
• EN 61010-031: 2002
• 300Vrms CAT III safety rated
• EN 61236 :1998 +A1, A2, and A3
• IEC 61326-1
• CE certified
• cCSAus certified

Specifications
Attribute Value
Current 450A
Probe Type AC/DC
Minimum Bandwidth 0Hz
Maximum Bandwidth 20kHz
Maximum Conductor Size 19mm
Safety Category CAT III 300 V
Safety Category Level CAT III
Model Number p I310S
Best Accuracy ±1% + 300 mA
Safety Category Voltage 300V
Bandwidth 1kHz
2 In stock for delivery next working day
available from Europe for delivery within 2 working day(s)
Price Each
kr 3 284,00
(exc. VAT)
kr 4 105,00
(inc. VAT)
Units
Per unit
1 +
kr 3 284,00
Calibration Options: