Amphenol, FCE17 15 Way Panel Mount D-sub Connector Socket, 2.74mm Pitch

  • RS Stock No. 704-7447
  • Mfr. Part No. FCE17-A15SM-210
  • Brand Amphenol
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Amphenol Straight Solder Bucket Connectors

These Amphenol Filtered D-Sub FCE17 Series Straight Pin or Socket connectors are Panel mount with solder cup tails.

Filter Capacitance of 470 pF, 820 pF, 1000 pF or 5600 pF are available indicated by a 1, 4, 5 and 9 in the Manufacturers Part Number i.e. FCE17-*****-*X** respectively
Ø3 mm mounting holes with fixing centres of 25 mm, 33.3 mm, 47 mm or 63.5 mm for E09, A15, B25 and C37 sizes respectively
Solder bucket termination with Matte Tin Plating accepts wire up to 20 awg
Insulation Resistance 3000 MΩ
Contact Resistance 15 mΩ

Amphenol Filtered 'D' Connectors

These filtered connectors are compact interconnect devices that can filter unwanted EMI. The capacitors are mounted inside the connector between each of the contacts and the connector ground shell. They provide:

Better EMI Control – With minimized lead inductances and short, direct paths to ground of the filter, performance will typically out perform the same filter components on a P.C.B. by a factor of three to one
PCB Space Savings – Incorporating filter elements into the connector, enables simplification of the required filter schematic for the necessary performance plus a savings of 2-4 square inches
Cost Savings – Filter elements, such as inductors and capacitors, must no longer be purchased, stocked, assembled or tested. Fewer components means greater reliability at lower cost
Easy EMI/RFI Upgrade – These compact filtered connectors fit standard non-filtered connector footprints. For improved EMC performance, simply replace the existing connector with a filtered connector
EMC Compliance & Immunity – EMI that is generated from the electronic device, radiated or conducted, will be re-directed to chassis ground through the connector shell. This same device will also protect the system from external EMI/RFI noise (such as radio transmitters, ESD, or natural phenomena such as lightning) in the same way

Specifications
Attribute Value
Number of Contacts 15
Gender Female
Body Orientation Straight
Mounting Type Panel Mount
Pitch 2.74mm
D Connector Type Filtered D-Sub
D-Sub Shell Size A
Termination Method Solder
Current Rating 5.0A
Housing Material Steel
Length 39.14mm
Width 12.55mm
Depth 16.73mm
Dimensions 39.14 x 12.55 x 16.73mm
Maximum Operating Temperature +85°C
Minimum Operating Temperature -40.0°C
Contact Plating Gold over Nickel
Contact Material Phosphor Bronze
Series FCE17
35 In stock for delivery within 1 working days
Price Each
kr 139,68
(exc. VAT)
kr 174,60
(inc. VAT)
Units
Per unit
1 - 19
kr 139,68
20 +
kr 129,81
Related Products
From Phoenix Contact, a range of solder D-Sub ...
Description:
From Phoenix Contact, a range of solder D-Sub connectors. The female high density D-Sub connectors in this series have copper alloy contacts in a tin plated steel shell. The connectors have 3 mm mounting holes on each side of the ...
The Schurter FKH series inlet filter is a ...
Description:
The Schurter FKH series inlet filter is a male, panel mount type C14 IEC connector with a dual fuse. It is ultra-compact, panel mount screw-on version from the front side and has four key functions. The filter has a voltage ...