ON Semiconductor NCV7428D13R2G System Basis Chip, 1.8mA 8-Pin, SOIC

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PH
Product Details

NCV7428 System Basis Chip, ON Semiconductor

The NCV7428 is a System Basis Chip integrating power supplies, undervoltage detection and a LIN bus transceiver typically for automotive Electronic Control Unit (ECU) applications. This device is AEC-Q100 qualified for automotive use.

• Output supply voltage: +3.3V (NCV7428D13), +5V (NCV7428D15) • Output supply current: 70mA
• Undervoltage detector with reset output to supplied microcontroller
• LIN transceiver, LIN2.x and J2602 compliant
• Load dump protection (+45V)
• LIN bus pin protected against transients in an automotive environment
• ESD protection level for Vs and LIN > ±8kV
• Operating temperature range: -40 to +125°C
• AEC-Q100 qualified

RS Product Codes

842-7885 NCV7428D13R2G System Basis Chip, +3.3V output
842-7888 NCV7428D15R2G System Basis Chip, +5V output

Standards

AEC-Q100

Specifications
Attribute Value
Minimum Output Voltage 3.234 V
Maximum Output Voltage 3.366 V
Minimum Input Voltage 5.5 V
Maximum Input Voltage 28 V
Minimum Output Current 1.8mA
Maximum Output Current 70mA
Mounting Type Surface Mount
Package Type SOIC
Pin Count 8
Maximum Operating Temperature +150 °C
Minimum Operating Temperature -40 °C
Length 4.98mm
Automotive Standard AEC-Q100
Width 3.99mm
Dimensions 4.98 x 3.99 x 15.49mm
Height 15.49mm
Available to back order for despatch 09.12.2020
Price Each (On a Reel of 3000)
kr 3,498
(exc. VAT)
kr 4,372
(inc. VAT)
Units
Per unit
Per Reel*
3000 +
kr 3,498
kr 10 494,00
*price indicative
Related Products
The MC3390x devices are System Basis Chips featuring ...
Description:
The MC3390x devices are System Basis Chips featuring multi-output power supplies, safety supervision and a CAN transceiver for automotive-based microcontroller systems. • Flexible SMPS pre-regulator allowing two topologies: non-inverting buck-boost or standard buck• Switch mode power supply (SMPS) for ...
The VNC2 is the second of FTDI’s Vinculum ...
Description:
The VNC2 is the second of FTDI’s Vinculum family of Embedded dual USB host controller devices. The VNC2 device provides USB Host interfacing capability for a variety of different USB device classes including support for BOMS (bulk only mass storage), ...
The USB 2.0 Hi-Speed to MPSSE cables contain ...
Description:
The USB 2.0 Hi-Speed to MPSSE cables contain a small internal electronic circuit board, utilising the FTDI FT232H, encapsulated into the USB connector end of the cable. This chip handles all the USB signalling and protocols. The cables provide a ...
Designed to replace an existing DE9 connector, (male ...
Description:
Designed to replace an existing DE9 connector, (male or female) RS-232/TTL UART connection with a drop-in USB replacement connection. Miniaturised modules which closely resemble a DE9 connector for PCB mountingUSB mini-B socket connector. The modules contain a USB-Serial bridge IC ...