Electromen OY, DC Motor Controller, Potentiometer Control, 12 32 V dc, 8 A

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FI
Product Details

PWM DC 8A 12-32Vdc

EM-174 motor drive is designed for DC-motor speed control. The unit regulates motor voltage so a non regulated supply voltage is suitable. Potentiometer or direct voltage signal can be used to give the speed control value. Rotation direction changes when control input value turns negative or if control input signal is applied to direction input.The unit has reference positive and negative signal for potentiometer use, i.e. the potentiometer can also be used to drive in both directions, the motor stops at potentiometer middle position. Set value range can be scaled to range trim.,During a direction change, the controller waits for motor to stop before driving in opposite direction. This avoids current peaks at direction change. The current limit can be set with a pot or direct voltage signal to protect the motor and mechanics in jam situations. Start up speed can be limited an acceleration ramp, which slowly rises the motor voltage in a desired way. Ramp time is set with a pot.EM-174 can be optimised for 12 or 24 V supply use.

Bi-directional
No brake
Controlled direction change +/-10v or 0-10v
Soft start ramp
Adjustable current limit
Load compensation (IR comp)

Specifications
Attribute Value
Supply Voltage 12 32 V dc
Current Rating 8 A
Voltage Rating 40 V
Control Input Potentiometer
Length 65mm
Width 73mm
Depth 30mm
Dimensions 65 x 73 x 30 mm
Operating Temperature Range -20 +70 °C
10 In stock for delivery within 1 working days
Price Each
kr 1 491,31
(exc. VAT)
kr 1 864,14
(inc. VAT)
Units
Per unit
1 +
kr 1 491,31
Related Products
This range of cost effective low voltage dc. ...
Description:
This range of cost effective low voltage dc. motor controllers are suitable for use with permanent magnet dc. motors up to 12A. The boxed version is protected to IP22.,Comprehensive instruction sheet supplied. Adjustable maximum and minimum speedsIR compensation. Adjustable overload. ...
Small size. High current output. Current limit. Zero ...
Description:
Small size. High current output. Current limit. Zero current limit. Overvoltage brake. Speed setting. Flexible control inputs. Impulse / continuous mode. Rail base mountable. Digital parameter setting48V version of EM-241CCurrent limit setting input ( new )Freewheel options ( new )2 ...
High current output. Brake load output. Current limit. ...
Description:
High current output. Brake load output. Current limit. Current limit for brake also. Zero-current limit. Speed setting/adjustment. Flexible control inputs. Impulse / continuous mode. Rail base mountable. Digital parameter settingC versions program2/16k. Hz pwm freq. options. Freewheel options. Autoreverse option. ...
Analog feedback5V, 10V or 4-20mA control. Position accuracy ...
Description:
Analog feedback5V, 10V or 4-20mA control. Position accuracy max. 0,1%Solid state power stage. Small size, great performance. Digitally settable parameters. Verstile dynamic settings. Housing options available. Pwm Freq, 2/16k. Hz ( since prog. v1.3 )Improved accurate , parameter 17, prog. ...