Development Kit Tester Click for use with Testing and Diagnostics of the MikroBUS™ Socket Pin States

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Tester click is a Click board™ used as a diagnostic tool on the mikroBUS™ socket. It contains an array of 2x6 LEDs, which signalize the presence of the HIGH/LOW logic level on each pin, providing a visual feedback to the developer. Two additional LEDs indicate the presence of +3.3V and +5V on the mikroBUS™ power rails. This simple diagnostic tool can save hours of troubleshooting, saving the application developer from having to connect various complicated measurement instruments, only to test logic states on the specific mikroBUS™ pins.

Specifications
Attribute Value
Accessory Type Tester Click
For Use With Testing and Diagnostics of the MikroBUS™ Socket Pin States
3 In stock for delivery within 1 working days
Price Each
kr 58,82
(exc. VAT)
kr 73,52
(inc. VAT)
Units
Per unit
1 +
kr 58,82
Related Products
Xilinx Spartan-7 FPGA (XC7S25-1CSGA225C)3,650 slices containing four 6-input ...
Description:
Xilinx Spartan-7 FPGA (XC7S25-1CSGA225C)3,650 slices containing four 6-input LUTs and 8 flip-flops1,620 Kbits of fast block RAMThree clock management tile, each with a phase-locked loop and mixed-mode clock manager80 DSP slices. Internal clock speeds exceeding 450 MHz. On-chip analogue-to-digital converter ...
Compatible Design Upgrade 3D Printers Printers, POS Office ...
Description:
Compatible Design Upgrade 3D Printers Printers, POS Office and home automation Textile, Sewing Machines CCTV, Security ATM, Cash recycler HVAC2-phase stepper motors up to 2A coil current (peak) STEP/DIR Interface with 2, 4, 8, 16 or 32 microstep pin setting ...
Ultra-Small X2QFN Package:2 mm ´ 1.5 mm ´ ...
Description:
Ultra-Small X2QFN Package:2 mm ´ 1.5 mm ´ 0.4 mm12-Bit Noise-Free Resolution. Wide Supply Range: 2.0 V to 5.5 VLow Current Consumption: 150 μA (Continuous-Conversion Mode)Programmable Data Rate:128 SPS to 3.3 kSPSSingle-Cycle Settling. Internal Low-Drift Voltage Reference. Internal OscillatorI2C Interface: ...
No firmware development required. Simple GUI-based configurator. Integrated ...
Description:
No firmware development required. Simple GUI-based configurator. Integrated USB transceiver, no external resistors required. Integrated clock, no external crystal requiredUSB 2.0 full-speed compatible. Data transfer rates up to 3 MbaudUSB Battery Charger Detection (USB BCS 1.2 Specification)Remote wakeup for ...