RS Pro IDM91E Handheld Digital Multimeter With UKAS calibration , 10A ac 600V ac 10A dc 600V dc

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

RS PRO IDM91E Rugged Industrial Digital Multimeter

RS PRO IDM91E digital multimeter (DMM) designed for harsh environments. This handheld DMM is a tool which can measure capacitance, voltage, electrical current and resistance with diode and continuity check. The rugged body guarantees drop prof resistance from up to 1.5 m. The multimeter is also waterproof with a rating of IP54. Featuring fuse protection on both 200 mA and 10 A current ranges and a specially designed beep guard system. That system provides a constant beep warning if the test leads put in the current jacks and select an incorrect function.

The meter is supplied with a protective holster that includes a built-in tilt stand, a nail hook, and convenient test lead storage. This holster provides an extra degree of protection and convenience for your meter.

RS PRO IDM 91E Multimeters are designed to meet Class II IEC 1010 and UL 3111 standards for the safest operation in all applications.

This device has been designed for the most demanding users that value solid construction and highly accurate measurements.

Features and Benefits

• 3 1/2 digit LCD
• 0.5% basic DCV accuracy
• 1.3% basic ACV accuracy
• 1.0% basic DCA accuracy
• 1.5% basic ACA accuracy
• 0.75% basic OHM accuracy
• Continuity and diode test
• 500V dual-fuse protection
• Auto power-off
• Beep Guard™ warning system
• Water resistant rating IP64
• 1.5m (5 feet) dropproof
• Protective holster with tilt stand
• IEC 1010-1 CAT.III 600V/ CAT.II 1000V
• One set of 1:1 probe

What does it measure?

DC and AC Voltages - up to 600 V
DC and AC Current - up to 10A
Resistance and continuity checking - up to 20 MΩ
Diode - open circuit voltage up to 3.2V

Batteries?

300 Hours (Alkaline)
Single 9V (NEDA 1604 or IEC 6F22)
Low battery indicator
Auto power off - approx 30 minutes after the last operation

What It Incudes?

Installed battery
Test Leads
User manual
Protective holster

Dimensions:

Without Holster:
Width 84 mm
Length 175 mm
Height 31 mm
With Holster:
Width 95 mm
Length 192 mm
Height 50 mm

Typical Applications:
A digital multimeter is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:
Electrical and electronic industries

Safety guidelines
When using any electrical test equipment it is advised that you refer to the user’s manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.

Standards

IEC 61010-1, CAT.III 300 v, CAT.II 600 V

Specifications
Attribute Value
Multimeter Type Handheld
Absolute Maximum AC Current Measurement 10A ac
Absolute Maximum DC Current Measurement 10A dc
Calibrated UKAS
Absolute Maximum Resistance Measurement 20MΩ
Absolute Maximum AC Voltage Measurement 600V ac
Absolute Maximum DC Voltage Measurement 600V dc
Functions Measured AC Current, AC Voltage, Continuity, DC Current, DC Voltage, Diode Test, Resistance
True RMS No
Display Type LCD
Model Number p IDM91E
DC Current Measurement Resolution 0.1µA
AC Current Measurement Resolution 0.1µA
AC Voltage Measurement Resolution 0.1mV ac
DC Voltage Measurement Resolution 0.1mV dc
Resistance Measurement Resolution 100mΩ
Best DC Current Accuracy ±1% + 1 Digits
Safety Category Level CAT III
Weight 550 (With Holster)g
Battery Life 300 h
Height 175 (Without Holster) mm, 192 (With Holster) mm
Minimum Operating Temperature 0°C
Best AC Voltage Accuracy ±1.25% + 4 Digits
Width 31 (Without Holster) mm, 50 (With Holster) mm
Best AC Current Accuracy ±2.5% + 3 Digits
Maximum Operating Temperature +50°C
Length 84 (without Holster) mm, 95 (with Holster) mm
Best Resistance Measurement Accuracy ±0.75% + 1 Digits
Safety Category Voltage 600V
Battery Type IEC 6F22, NEDA 1604, 9V
Best DC Voltage Accuracy ±0.5% + 1 Digits
Dimensions 84 x 31 x 175 (without Holster) mm, 95 x 50 x 192 (with Holster) mm
182 In stock for delivery within 3-5 working days
Price Each
kr 1 227,00
(exc. VAT)
kr 1 533,75
(inc. VAT)
Units
Per unit
1 +
kr 1 227,00
Not available for next day delivery