BK Precision 2831E Bench Digital Multimeter With RS Calibration, 20A ac 750V ac 20A dc 1000V dc 20MΩ

Technical Reference
Legislation and Compliance
Non Compliant
COO (Country of Origin): CH
Product Details

B&K Precision Model 2831E, 4 Digit True RMS Bench Multimeter

B&K Precision model 2831E is a versatile and dependable bench-top digital multimeter. It takes typical multimeter measurements such as volts, ohms and amps with great accuracy and stability. Readings can be taken at a maximum rate of 25 readings/sec with measurement rates selectable between slow, medium, and fast. This instrument is suitable for applications in education, service and repair and manufacturing requiring basic and reliable measurements. The 2831E has excellent quality, good resolution making it an essential part of the test bench.
This multimeter has built-in math functions not found in other bench meters in this price category. The 2831E is an attractive choice for cost-conscious users requiring a basic and dependable meter with a broad range of extra features offered at a value price. Another feature is the ability to perform two measurements at once, for example Volts AC and DC or Volts AC and frequency.
The LCD has a 20,000-count resolution, meaning it can display up to 19,999 units (4 1/2 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category I installations up to 1,000V (which covers protected electrical equipment such as small household appliances). Also Category II installations up to 300V (which covers large household appliances and devices connected to a fixed power supply, such as refrigerators and air conditioners).

Features and Benefits:

Up to 20,000 Count display resolution
4 1/2 Digit Duel LED Display for clear reading in the darkest environment
Basic VDC accuracy of up to 0.03%
Dual display to indicate two measurements simultaneously
AC + DC True RMS for accurate interpretation of any waveform signal
Up to 25 readings per second measurement rate
AC volt and amp measurement over wide frequency range (ACV 100 kHz/ACI 20 kHz)
Limit mode for Pass/Fail testing
Built-in math functions: Rel; Max/Min; dBm; dB; %; Hold; Compare
CATI (1000 V)/CATII (300 V) Protection
USB (Virtual Com)
SCPI compatible

Increase Productivity with PC Connectivity and Math Functions

The built-in math operations Rel, Max/Min, dBm, dB, Percent (%), and Hold enhance your productivity and provide educators with a convenient tool to teach basic math concepts.
The 2831E is programmable via USB interface using industry standard SCPI commands. You can control and configure the instrument from a remote PC and retrieve measurement results for further analysis.

Limit Operation

The 2831E’s limit operation lets you set and control the values that determine a HI / IN / LO status of subsequent measurements. The meter can be configured to emit an audible alarm when readings are outside of the configured limit.


Service and repair
Test & measurement fields that require basic measurements

Supplied with

Test leads, power cord, spare fuse, operating manual , calibration certificate and test report

Attribute Value
Multimeter Type Bench
Absolute Maximum AC Current Measurement 20A ac
Absolute Maximum DC Current Measurement 20A dc
Calibrated RSCAL
Absolute Maximum DC Voltage Measurement 1000V dc
Absolute Maximum Resistance Measurement 20MΩ
Absolute Maximum AC Voltage Measurement 750V ac
Functions Measured AC Current, AC Voltage, DC Current, DC Voltage, Resistance
True RMS Yes
Maximum Frequency 1MHz
Display Type Digital
Model Number p 2831E
DC Current Measurement Resolution 1mA dc
AC Current Measurement Resolution 1mA ac
Resistance Measurement Resolution
DC Voltage Measurement Resolution 1mV dc
AC Voltage Measurement Resolution 1mV ac
Best AC Voltage Accuracy ±3 %
Best Resistance Measurement Accuracy ±0.3 %
Best DC Voltage Accuracy ±0.04 %
Dimensions 225 x 335 x 100mm
Safety Category Voltage 300 V, 1000V
Best DC Current Accuracy ±0.3 %
Safety Category Level CAT I, CAT II
Weight 2.5kg
Length 225mm
Width 335mm
Height 100mm
Best AC Current Accuracy ±2 %
Available to back order for despatch 21.12.2020
Price Each
kr 4 219,00
(exc. VAT)
kr 5 273,75
(inc. VAT)
Per unit
1 +
kr 4 219,00
Not available for next day delivery
Related Products
RS PRO RSDM3055 (123-6465) is a 5 digit ...
RS PRO RSDM3055 (123-6465) is a 5 digit multimeter with a dual-readout display. RS PRO RSDM3055A (123-6466) is of similar specification but, in addition, includes a USB to GPIB adapter. These devices can measure capacitance, voltage, electrical current, frequency, period, ...
The 2708B is a full-featured auto ranging true ...
The 2708B is a full-featured auto ranging true RMS DMM that combines performance, value and functionality. The 3400 count LCD has a 34 segment bar graph that simulates analog responsiveness. The 2708B can measure resistance values up to 34 Mohm. ...
The MX 5060 bench- top digital multimeter can ...
The MX 5060 bench- top digital multimeter can be used for TRMS AC + DC measurements. The 60000 count double transflective backlit LCD screen with bargraph and central zero offers instantaneous display of the signal variations. To ensure good measurement ...
RS PRO IDM-8351 offers unprecedented functionality plus the ...
RS PRO IDM-8351 offers unprecedented functionality plus the fastest measurement speed in its class. This instrument can measure 12 functions including AC/DC voltage, AC/DC current, AC+DC voltage/current, two-wired and four-wired resistance tester, continuity beeper, diode test, capacitance, frequency and ...