DSPIC33EP128MC502-I/SO Microchip, 16bit Digital Signal Processor 70MHz 128 kB Flash 28-Pin SOIC
- RS Stock No.:
- 178-4867
- Mfr. Part No.:
- DSPIC33EP128MC502-I/SO
- Brand:
- Microchip
Discontinued product
- RS Stock No.:
- 178-4867
- Mfr. Part No.:
- DSPIC33EP128MC502-I/SO
- Brand:
- Microchip
Technical Reference
Legislation and Compliance
- COO (Country of Origin):
- TH
Product Details
dsPIC33EPxxxGP/MC20x/50x 16-Bit Digital Signal Controllers
The dsPIC33EPxxxGP/MC20x/50x family of Digital Signal Controllers from Microchip is a comprehensive range of 16-bit DSPs based upon the dsPIC33E core, offering up to 70MIPS performance. The range has an extensive array memory and package variants, all offering a large variety of on board peripherals.
Microcontroller Features
70 MHz Max. CPU Speed
21 to 53 I/O Pins – Model Dependant
Power-On Reset (POR)
Power-Up Timer (PWRT)
Oscillator Start-Up Timer (OST)
Brown-Out Reset (BOR)
Extended Watchdog Timer (WDT)
High/Low-Voltage Detection (HLVD) Module
In-Circuit Serial Programming (ICSP)
In-Circuit Debug (ICD)
21 to 53 I/O Pins – Model Dependant
Power-On Reset (POR)
Power-Up Timer (PWRT)
Oscillator Start-Up Timer (OST)
Brown-Out Reset (BOR)
Extended Watchdog Timer (WDT)
High/Low-Voltage Detection (HLVD) Module
In-Circuit Serial Programming (ICSP)
In-Circuit Debug (ICD)
Peripherals
High-Speed PWM
10/12-Bit Analogue-to-Digital Converter (ADC) - 6 to 16 Channels Depending on Model
Five 16-Bit Timers
Two 32-Bit Timers
Operational Amplifier – 2 to 3 Depending on Model
Comparators – 3 to 4 Depending on Model
Charge Time Measurement Unit (CTMU) – Supports mTouch™ Capacitive Touch Sensing
Two UART Modules
Two SPI Modules
ECAN™ Module
Two I2C™ Modules
Programmable Cyclic Redundancy Check (CRC)
Peripheral Pin Select (PPS)
Peripheral Trigger Generator (PTG)
10/12-Bit Analogue-to-Digital Converter (ADC) - 6 to 16 Channels Depending on Model
Five 16-Bit Timers
Two 32-Bit Timers
Operational Amplifier – 2 to 3 Depending on Model
Comparators – 3 to 4 Depending on Model
Charge Time Measurement Unit (CTMU) – Supports mTouch™ Capacitive Touch Sensing
Two UART Modules
Two SPI Modules
ECAN™ Module
Two I2C™ Modules
Programmable Cyclic Redundancy Check (CRC)
Peripheral Pin Select (PPS)
Peripheral Trigger Generator (PTG)
Specifications
Attribute | Value |
|---|---|
| Maximum Frequency | 70MHz |
| Data Bus Width | 16bit |
| RAM Size | 16 kB |
| Instruction Set Architecture | Modified Harvard |
| Program Memory Size | 128 kB |
| Program Memory Type | Flash |
| Mounting Type | Surface Mount |
| Package Type | SOIC |
| Pin Count | 28 |
| Typical Operating Supply Voltage | 3 to 3.6 V |
| Number of UART Channels | 2 |
| Number of ADC Units | 1 |
| Maximum Operating Temperature | +85 °C |
| Number of PWM Units | 1 |
| Length | 17.9mm |
| ADCs | 1(6 x 12 bit) |
| Timer Resolution | 48bit |
| Dimensions | 17.9 x 7.5 x 2.35mm |
| Pulse Width Modulation | 1 (6 x 8.32 ns) |
| Number of SPI Channels | 2 |
| PWM Channels | 6 |
| Width | 7.5mm |
| Number of USART Channels | 0 |
| Timers | 2 x 32 bit, 5 x 16 bit |
| ADC Channels | 6 |
| Number of CAN Channels | 1 |
| PWM Resolution | 8.32ns |
| Minimum Operating Temperature | -40 °C |
| ADC Resolution | 12bit |
| Number of LIN Channels | 0 |
| Height | 2.35mm |
| Number of PCI Channels | 0 |
| Number of I2C Channels | 2 |
| Number of Timers | 7 |
| Number of Ethernet Channels | 0 |
| USB Channels | 0 |