S8TS Power Supply, 100 → 240V ac ac Input, 24V dc dc Output, 2.5A Output, 60W

RS Stock No.:: 288-3263
Mfr. Part No.:: S8TS-06024
Brand:: Omron

S8TS Power Supply, 100 → 240V ac ac Input, 24V dc dc Output, 2.5A Output, 60W

View this category

Price Each**

Kr. 1 848,30

(exc. VAT)

Kr. 2 310,38

(inc. VAT)

Available to back order for despatch 23.02.2025*

* Delivery dates may change based on your chosen quantity and delivery address.

FREE delivery for orders over kr 500,00

Units	Per unit
1 +	Kr. 1 848,30

**price indicative

RS Stock No.:: 288-3263
Mfr. Part No.:: S8TS-06024
Brand:: Omron

Datasheet - S8TS-06024

25W to 60W S8TS Series

Range Features:

Modular units which can be connected together (4 unit’s max. on 24Vdc and 12Vdc, 2 units on 5Vdc)
Up to 10A max. output (+1 unit for redundancy -12V and 24V units only)
On board (bus style) connections for AC/DC (same DC voltages only)
DC outputs can be combined or used separately
DC voltage low indication and alarm on each unit
Overload/Over-voltage protection
EMI to EN50081-1, FCC-B
Under-voltage detection and LED indicator

Standards

EN60950, UL1950, CSA22.2-14-950.

Approvals

UL Recognised; UL Recognised for Canada

Part Number S8TS-06024

The S8TS Switch mode, Din Rail mounted power supply is a covered type, screw terminal basic block without Bus Line connectors. S8TS-06024 has a power rating of 60W and an output voltage of 24 V dc plus a rated input voltage of 100 V ac to 240 V ac. This Standard undervoltage alarm model is natural air cooling.

• Covered type power supply Basic block

• Screw terminal

• DIN Rail Mounted

• Green output indicators

• Natural air cooling

• Power rating 60 W

• Output voltage 24 V dc

• Input voltage 100 V ac to 240 V ac

• Rated output current 2.5 A

• Harmonic current emissions

• Efficiency 75% min.

• Overload and over voltage protection

• Under-voltage alarm output – open collector, 30 V dc, 50 mA,

• Weight 450g

Safety and Storage.

Do not use an inverter output for the power supply. Mount the power supply using a DIN Rail and secure correctly ensuring limited vibration and shock resistance. Install the power supply away from contactors and other devices. Keep the power supply away from strong high frequency noise and surge.

Vibration resistance 10 Hz to 55 Hz. 0.375 0.26 mm single amplitude in each 3 directions for 2 hours.

Shock resistance 150 m/s**2 in each 6 directions 3 times.

Standards

UL 508 (Listing; class 2: Per UL 1310), 1950, 1604 (class I, division 2, groups A, B, C, D hazardous locations)
cUL: CSA C22.2 No 14, No.213 (class I, Division 2, groups A, B, C, D hazardous locations), No. 950 (class 2) ( class 2 approval does not apply to parallel operation)
EN/VDE: EN50178 (=VDE0160), 60950 (VDE0806)