Entrelec, SNA, 800 V ac Standard Din Rail Terminal, Spring Termination

  • RS Stock No. 445-9377
  • Mfr. Part No. 1SNA290011R2500
  • Brand Entrelec
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

Standard Terminal Blocks

These screwless spring cage clamp terminals are specifically designed for use with 'Top Hat' rail.,The top entry conductor connection is simplicity itself; a flat-bladed screwdriver will ease the spring clamp apart ready for conductor insertion.The range covers conductor sizes from 2.5mm² to 10mm² stranded wire (4mm² to 16mm² solid wire). Disconnect fuse and sensor/actuator terminals also available.,The grey (phase) terminals are available in standard (1 in / 1 out, 1 in / 2 out), and 2 in / 2 out form, together with a 2.5mm² double-deck terminal.,The standard (1 in / 1out) yellow terminals are designed for grounding purposes, but they DO NOT provide an electrical connection to the DIN rail.,They have a green colour-coded conductor entry point, for the intended insertion of a grounding or earth-potential cable.,* Direct earth (connection to rail) green/yellow terminals are available in 2.5/5mm², and 6/8mm²,End plates in respective sizes are also available, as are dedicated end-stops.

Warning

  • The yellow terminals must not be considered to be 'direct earth' terminals as they do not have an integral connection to the rail.
Specifications
Attribute Value
Series SNA
Cable CSA 2.5mm²
Colour Grey
Current Rating 24A
Number of Levels Single
Termination Method Spring
Voltage Rating 800 V ac
Pitch 5mm
Minimum Operating Temperature -5°C
Maximum Operating Temperature +40°C
Discontinued product
Related Products
This universal range of terminals mounts on both ...
Description:
This universal range of terminals mounts on both asymmetric rail 'G' profile and Top hat profile. Moulded in tough flame-resistant polyamide 6.6, with a working temperature of -55°C to +130°C. The captive terminal screws have hardened heads to prevent burring. ...
DIN rail mounted terminals, with universal mounting foot ...
Description:
DIN rail mounted terminals, with universal mounting foot clips to both ’G’ profile (asymmetric to BS5825:1990) and ’top hat’ profile (symmetric to BS5584:1978) rails, with a range of features to suit all applications. The 2.5 to 10mm² terminals have common ...
Feed-through terminal blocks with cage clamp® connection. • ...
Description:
Feed-through terminal blocks with cage clamp® connection. • DIN Rail type TS 35• 3 conductors (1 input, 2 outputs)• Quick connection using cage-type springs, not affected by impact and vibration• For rigid, semi-rigid and flexible conductors• Front wiring.
A fully stocked 130-piece boxed kit of the ...
Description:
A fully stocked 130-piece boxed kit of the ’UKN’ series terminals, which is a cost-effective solution for service and maintenance engineers, putting the right terminal to hand when it is needed. Lid inlay provides details of contents. Two screwdrivers and ...