Phoenix Contact 2715966 DIK 1.5 Series Non-Fuse DIN Rail Terminal Grey, 2.5 mm², 3-Level, Screw

Subtotal (1 unit)*

Kr. 62,28

(exc. VAT)

Kr. 77,85

(inc. VAT)

Add to Basket
Select or type quantity
Temporarily out of stock
  • 110 unit(s) shipping from 16 March 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units
Per unit
1 +Kr. 62,28

*price indicative

RS Stock No.:
648-6955
Distrelec Article No.:
148-28-017
Mfr. Part No.:
2715966
Brand:
Phoenix Contact
Find similar products by selecting one or more attributes.
Select all

Brand

Phoenix Contact

Colour

Grey

Product Type

Non-Fuse DIN Rail Terminal

Sub Type

Sensor/Actuator

Number of Levels

3

Voltage

250 V

Series

DIK 1.5

Cable CSA

2.5 mm²

Minimum Wire Size AWG

24 AWG

Maximum Wire Size AWG

12 AWG

Fused

No

Minimum Operating Temperature

-60°C

Terminal Block Current

24A

Termination Type

Screw

Hazardous Area Certification

No

Maximum Operating Temperature

105°C

Standards/Approvals

CSA

COO (Country of Origin):
PL

Phoenix Contact DIN Rail Terminal Block, 24A Current Rating, 250V Voltage Rating - DIK 1.5 - 2715966


Safely distribute power to your sensor or actuator with this terminal block from Phoenix Contact. It attaches to your DIN rail, so installation is quick and easy. Tighten it with screws in the M3 threaded terminals to keep it fixed in place and resistant to industrial vibration. Once installed, you can wire the block to a power supply and connect it up to your sensor/actuator device to communicate digital information to process controls and other industrial automation applications.

The unit's robust PA housing material protects against impact shock and abrasion damage. It has built-in Category III surge voltage protection so it doesn't need additional surge suppressors to operate safely.

The terminal block has three connection levels parallel to one another for a simplified setup. The through-terminal controls signal flow in the top level, while the middle and lower level take positive and negative connections, with the protective earth connections in the lower level.

• Flame-retardant behaviour stops vertical burning within 60 seconds to maximise safety

• Accepts wire sizes between 24 and 12 AWG for versatile installation options

• 24A current rating for compatibility with mid-level data transferral

• Maximum tightening torque of 0.6Nm to keep the fitting secure

Phoenix Contact Multi-level terminal Blocks


A range of multi-level terminal blocks from Phoenix Contact for the rational wiring of modern machine controls.

The terminal blocks are designed for mounting on flat top hat rail to DIN EN 50 022.

Features and Benefits


• All three wires in parallel on one terminal with the three-level initiator terminal

• Through-terminal for signal flow in top level

• Single-ended terminal locations for positive and negative connections in middle and lower level

• PE connection in lower level with the three-level actuator terminal

Approvals

UL, CUL, CSA

Related links