5 Way UT 4-PE/L Earth Block, Screw Down 26 → 10 AWG, 92.7mm Length, Grey

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PL
Product Details

UT Double-level Disconnect and Knife Disconnect Terminal Blocks

The UT screw terminal block series from Phoenix Contact combines the advantages of screw connection technology with the benefits of spring-loaded contacts.
They have a standard disconnect zone in the upper level and a double function shaft in the lower level. The UTTB terminal blocks also offer a level offset. If fully wired, it gives full access to the lower connection level and a perfect view of the lower labelling markers and conductor entry funnel.

Features and Benefits

• Each terminal point supports large surface labelling
• Convenient separation of circuits, thanks to lever-type disconnect knife
• Two separate potentials can be routed side by side with the help of bridging between non-adjacent terminal blocks (866-6807 and 866-6816)
• Test socket screws for insertion of test plugs (except 866-6847)
• RoHS compliant

Standards

IEC 60947-7-1, V0 UL94 flammability rating.

Approvals

UL, cUL, EAC, CSA, cULus.

Phoenix Contact CLIPLINE UT Range

Specifications
Attribute Value
Earth Block Type UT 4-PE/L
Wire Size 26 → 10 AWG
Colour Grey
Number of Ways 5
Termination Method Screw Down
Housing Material Polyamide
Current Rating 28A
Voltage Rating 500 V
Length 92.7mm
Width 6.2mm
Height 60.1mm
Maximum Operating Temperature +130°C
Minimum Operating Temperature -60°C
Available to back order for despatch when stock is available
Price Each
kr 85,16
(exc. VAT)
kr 106,45
(inc. VAT)
Units
Per unit
1 +
kr 85,16
Related Products
These have same dimensions as the standard terminals. ...
Description:
These have same dimensions as the standard terminals. Terminals clamp mechanically and electrically to the G type (TS32) DIN rail. Separation of electrical and mechanical function. Screw or tension clamp for mechanical function. Copper busbar for electrical function. Maintenance free, ...
Phoenix Contact range of feedthrough DIN rail terminals ...
Description:
Phoenix Contact range of feedthrough DIN rail terminals with two cable inputs and two outputs. For high density installations in a confined environment.
Double deck terminals where both levels are electrically ...
Description:
Double deck terminals where both levels are electrically connected to the DIN rail via an earthing foot. Dimensionally the same as the standard Double Deck terminal, the same end cover and jumper bar can be used. Cable CSA 2.5mm².
These terminals will accept M4 (6mm2 csa type) ...
Description:
These terminals will accept M4 (6mm2 csa type) or M6 (25mm2 csa type) crimp terminal rings. Provision of a quick, secure connection is made possible by the hinged cover wings which hold the nut. When the wings are folded up, ...