Megger MFT1741 Electrical Tester

  • RS Stock No. 172-0819
  • Mfr. Part No. 1009-987
  • Brand Megger
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

The MFT1741 multifunction tester has been designed for testing low voltage electrical installations, particularly in locations that suffer from high electrical noise. It provides all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations. Overlaying the new non-trip loop impedance measurement is the new “confidence meter”. As loop impedance values can be dramatically affected by circuit noise, the Confidence Meter displays the degree of confidence in the accuracy of the measured loop impedance.

Enhanced non-trip loop impedance measurement technology
“Confidence meter” measurement analysis (patent pending)
Full single and 3 phase compliant installation testing
10 mA to 1 A single and 3 phase RCD testing
Simple colour-coded test selection
Ambidextrous operation

Attribute Value
Loop Impedance Test Type 2 Wire (Hi Current), 2 Wire (Non-Trip Range), 3 Wire (Non-Trip Range)
Automatic RCD Test Yes
RCD Ramp Test Yes
Non-Tripping Yes
Insulation Test Voltage 100 V, 250 V, 500 V, 1000 V
Maximum Voltage Measurement 600V
Test Type Auto Test, Continuity, Earth Resistance, Insulation, Loop Test, RCD Ramp Test, RCD Test, Resistance
Earth Resistance Measurement Yes
Downloadable Data Yes
Interface Type Bluetooth
Continuity Test Current 15 mA, 200 mA
RCD Test Type A, AC, B, DC, S
Test Standards EN 61010, IEC 61326
Model Number p MFT1741
Dimensions 390 x 220 x 285mm
Battery Type AA, NiMH
Length 390mm
Width 220mm
Height 285mm
Minimum Operating Temperature -10°C
Power Source Battery, Mains
Safety Category CAT III 600 V, CAT IV 300 V
Safety Category Voltage 300 V, 600 V
Maximum Continuity Resistance 99.9kΩ
Plug Type BS 1363
Safety Category Level CAT III, CAT IV
Weight 1 (with Battery & Case)kg
Minimum Continuity Resistance 0.01Ω
Display Type Backlight
IP Rating IP54
Maximum Operating Temperature +55°C
9 In stock for delivery within 1 working days
Price Each
kr 19 634,40
(exc. VAT)
kr 24 543,00
(inc. VAT)
Per unit
1 +
kr 19 634,40
Calibration Options:
Related Products
DET24C is a clamp-on ground resistance tester that ...
DET24C is a clamp-on ground resistance tester that set new standards in terms of access, performance, features, simplicity of operation and safety. The units are designed with flat core ends to prevent dirt build-up, ensuring measurement integrity and improved reliability ...
TESTRANSFO2 is a small, hand held device which ...
TESTRANSFO2 is a small, hand held device which is used to check the functionality of a tri-phased transformer disconnected from the network. Usable on all distribution transformers. It automatically performs a sequence of tests taking only two min to confirm ...
Rugged, compact and lightweight, the C.A 6116N tester ...
Rugged, compact and lightweight, the C.A 6116N tester is specially designed for quick and effective familiarization. Its large backlit graphic colour LCD screen is particularly easy to read. A rotary switch on the instrument’s front panel gives direct access to ...
A range of insulation testers that meet the ...
A range of insulation testers that meet the relevant requirements of EN61557, BS7671, HD 384, IEC 364 and VDE 0413 for applications in all aspects of electrical contracting, building maintenance, testing, inspection and servicing. 20mm LCD display with true analogue ...