Schneider Electric VW3A4556 Choke 270mm Length,, 100 A, 200 → 690 V

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Altivar AC Line Choke

A line choke can be used to provide improved protection against overvoltages on the line supply and to reduce the current harmonics produced by the drive. The recommended chokes can be used to limit the line current. They have been developed in line with standard EN 50178 (VDE 0160 level 1 high energy overvoltages on the line supply). The inductance values are defined for a voltage drop between phases of between 3% and 5% of the nominal line voltage. Values higher than this will cause loss of torque. These chokes should be installed upstream of the drive.

The use of line chokes is recommended in particular under the following circumstances:
Close connection of several drives in parallel
Line supply with significant disturbance from other equipment (interference, overvoltages)
Line supply with voltage imbalance between phases above 1.8% of the nominal voltage
Drive supplied by a line with very low impedance (in the vicinity of a power transformer 10 times more powerful than the drive rating)
Installation of a large number of frequency converters on the same line
Reduction of overload in cos Ø correction capacitors, if the installation has a power factor correction unit

Specifications
Attribute Value
Accessory Type Choke
For Use With Altivar 31 Series, Altivar 61 Series, Altivar 71 Series
Voltage Range 200 → 690 V
Current Rating 100 A
Electrical Phase 3
Length 270mm
Width 210mm
Depth 180mm
Dimensions 270 x 210 x 180 mm
Discontinued product
Related Products
For controlling, displaying current values, adjusting or configuring ...
Description:
For controlling, displaying current values, adjusting or configuring drives Schneider Electric presents the VW3 A1 a compact user-friendly display terminal that is easy to use. A large number of the Altivar range are compatible with this accessory, including; Altivar 312, ...
Surface or flush mount. Connects directly to programmable ...
Description:
Surface or flush mount. Connects directly to programmable drives (ST5-Si, stock no. 455-845 and ST10-Si, stock no. 455-863) using standard programming cable. Power supplied direct from drive. Easy to program using SiTM Programmer software4 line, 20 character/line LCDNEMA 4//12 rating ...
Corcom filters are recognised worldwide for providing EMI/RFI ...
Description:
Corcom filters are recognised worldwide for providing EMI/RFI filtering solutions. TE offers over 70 Corcom filter series that are suitable for a wide range of applications across multiple industries. All Corcom filters have been designed and tested for susceptibility and/or ...
The Te. Sys U is a modular system ...
Description:
The Te. Sys U is a modular system for motor control; it enables the user to create a customised solution for their control requirements, from a series of standard modules. The plug-in modules allow the assembly and wiring before the ...