Microchip MCP39F511-E/MQ Energy Meter IC, 10 bit, 28-Pin QFN

  • RS Stock No. 145-9397
  • Mfr. Part No. MCP39F511-E/MQ
  • Brand Microchip
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TH
Product Details

MCP39F511 Energy Measurement ICs

The MCP39F511 from Microchip is an integrated, single-phase power monitoring device that provides real-time measurement of input power and energy values for AC/DC power supplies. On-board are two Delta-Sigma Analogue-to-Digital Converters (ADCs), a 16-bit Calculation Engine, EEPROM and a flexible 2-Wire Interface. An integrated low-drift voltage reference, combined with the 94.5 dB of SINAD performance on each measurement channel, allows for better than 0.1% accurate designs across a 4000:1 dynamic range.

Features

Power monitoring accuracy capable of 0.1% error across 4000:1 dynamic range
Built-in calculations using a 16-Bit processing core measuring:
- Active, reactive and apparent Power
- Active and reactive energy accumulation
- True RMS current, RMS voltage
- Line frequency, power factor
Dedicated Zero Crossing Detection (ZCD) pin
Dedicated PWM output pin
Automatic event pin control through fast voltage surge detection
Fast calibration routines
2-wire UART with 115.2k baud rate
512 bytes user-accessible EEPROM through page read/write commands
Non-volatile on-chip Memory
Low-Drift Internal Voltage Reference: 10 ppm/°C typical
Extended Temperature Range -40°C to +125°C

Energy/Power Measurement - Microchip

Specifications
Attribute Value
Resolution 10 bit
Mounting Type Surface Mount
Package Type QFN
Pin Count 28
Dimensions 5 x 5 x 0.95mm
Length 5mm
Width 5mm
Height 0.95mm
Maximum Operating Supply Voltage 3.6 V
Maximum Operating Temperature +125 °C
Minimum Operating Supply Voltage 2.7 V
Minimum Operating Temperature -40 °C
146 In stock for delivery within 1 working days
Price Each (In a Tube of 73)
kr 18,852
(exc. VAT)
kr 23,565
(inc. VAT)
Units
Per unit
Per Tube*
73 - 73
kr 18,852
kr 1 376,196
146 +
kr 17,286
kr 1 261,878
*price indicative
Related Products
Solid-state, compact one-piece unit10 bar LED display. Single ...
Description:
Solid-state, compact one-piece unit10 bar LED display. Single flashing LED signal for low battery energy reserve alert at 70% discharge. Alternate flashing LED’s alert for battery empty status at 80% discharge. Two reset methods: Open Circuit Reset (OCR) – upon ...
Alpha 50 is a compact multifunction meter with ...
Description:
Alpha 50 is a compact multifunction meter with touch screen LCD utility, which measures important electrical parameters in 3 phase and single phase network. It has optional output as one pulse or two pulse output for energy measurement. True RMS ...
The MEMO4 is an energy meter dedicated to ...
Description:
The MEMO4 is an energy meter dedicated to measuring and rebilling energy consumption on a 230 V ac single phase network. The meter allows you to check the main quantities at a glance on its backlit LCD screen due to ...
Using CMS-700 it is possible to measure and ...
Description:
Using CMS-700 it is possible to measure and calculate electrical parameters from both the mains and the branches, in order to provide the most comprehensive set of information on the system.A maximum of 3x32 sensors can be connected to the ...