Connecting ESD Grounding Cord 10mm, 3.6m Coiled

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): PH
Product Details

RS PRO Coiled Cords

In every ESD (electrostatic discharge) environment grounding is essential for blocking ESD. This coiled cord from our own RS PRO brand will safely direct static electricity to the ground. This will protect workers and equipment in an environment where sensitive electronic equipment is used, manufactured, assembled or repaired.

Features and Benefits

• High visibility - bright colours allow the supervisor to see that worker is wearing a wrist strap
• Eliminates intermittent failures that occur with less durable single and dual wire cords
• Rapid retraction strength polyurethane coil cord which provides high memory and less coil cord dragging on the work surface
• Relaxed retraction - will not interfere with your movements
• Improved snap design - stronger strain relief and snap retention for long life; low profile keeps the cord from being disconnected
• High-quality long-life yellow coil cord
• Integral 1MΩ, 2MΩ or 4MΩ resistor
• Soft polyurethane strain relief

Always remember!

• Test the ground before you use it
• Keep a room clean
• Test the wrist strap - best to test the strap is while it is worn
• Each individual workstation must be individually grounded to the ground bus or to the nearest equipment ground


RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.


Wrist bands and cords must be ordered separately.


Supports ESD S20.20 and EN 61340-5-1 ESD control programme compliance

Attribute Value
Cord Type Connecting
Termination Type Press Stud - Banana Plug/Croc Clip
Stud Size 10mm
Cord Length 3.6m
Cord Style Coiled
Lead Resistance 2MΩ
Colour Yellow
Complies with EN 61340-5-1 Yes
47 In stock for delivery within 1 working days
Price Each
kr 152,94
(exc. VAT)
kr 191,18
(inc. VAT)
Per unit
1 - 9
kr 152,94
10 - 19
kr 146,82
20 +
kr 142,24
Related Products
System comprises continuous monitor with 2 satellite modules. ...
System comprises continuous monitor with 2 satellite modules. Control unit can be mounted at eye level, where it will not impede worksurface area. Control unit LEDs indicate proper grounding of 2 mats/2 operators and continuously display grounding status. The satellite ...
Our own brand of RS Pro ESD wrist-straps ...
Our own brand of RS Pro ESD wrist-straps feature premium grade fabric band with an elastic ratio of 1:2.5” to 1:3. The outer surface of the wristband is non-conductive and the inside surface of the strap is conductive lined with ...
The Mag. Snap creates a superior electrical connection ...
The Mag. Snap creates a superior electrical connection to eliminate intermittent failures of traditional snaps/sockets used in wrist straps. The profile of a right angle banana plug is approximately a quarter of a straight banana plug. The lower profile reduces ...
Statshield® smocks are available in two lengths, the ...
Statshield® smocks are available in two lengths, the lab coat length and the jacket length. Both lengths are available in two styles - with snaps and with conductive elastic cuffs. Smocks are available in a range of colours.Statshield® smocks are ...