RS PRO Surface ESD Tester

Technical Reference
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): US
Product Details

Analogue Surface Resistance Test Kit

The Analogue Surface Resistance Test Kit is a portable battery-powered instrument designed to measure resistance point-to-point (Rp-p) and surface to ground (Rg). The meter is equipped with an automatic test voltage selector. The test voltage will switch from 10V to 100V should the measured resistance exceed 10 ohms.

Analogue compliance verification surface resistance checker
Automatic test range voltage selection compliance verification required by EN 61340-5-1
Portable operation with 9 Volt battery
LED Illuminates when battery power is low

Supplied with

1 Analogue surface resistance meter, 1x 9V alkaline battery, 2 shielded test leads, 2x 2.27 kilograms electrodes, 1 plastic Carrying Case, 1 certificate of calibration

RS Pro Surface ESD Tester Description

The Analogue Surface Resistance Test Kit is a portable battery-powered instrument designed to measure resistance point-to-point (Rp-p) and surface to ground (Rg). The meter is equipped with an automatic test voltage selector. The test voltage will switch from 10V to 100V should the measured resistance exceed 105 ohms.

ESD protected area products should be tested:
A. Prior to installation to qualify for listing in user’s ESD control plan. Approved ESD materials (see product qualification EN-61340-5-1 Table 3 - EPA Requirements)
B. During initial installation
C. For periodic checks of installed products as part of EN-61340-5-1 Compliance Verification testing per Table 3 - EPA Requirements.

Contents

1 x Analogue Surface Resistance Meter
1 x 9V Alkaline Battery
2 x Shielded Test Leads
2 x 2.27 kilograms Electrodes
1 x Plastic Carrying Case
1 x Certificate of Calibration

Specifications

Accuracy: +/- 1/2 decade
Meter: 0.2 kg
Kit: 5.4 kg
Meter: 11.4cm L x 7.1cm W x 5.3cm H
Plastic Carrying Case: 24.1cm L x 30.5cm W x 8.9cm H
Power Supply: 9V alkaline battery

Specifications
Attribute Value
Equipment Type Analogue Surface Resistance Test Kit
Power Source Battery
Test Point Surface
Supply Voltage 9V
Depth 241 mm
Height 89 mm
Display Type Analogue
Width 305mm
Complies with EN 61340-5-1 Yes
7 In stock for delivery within 1 working days
Price Each
kr 8 414,01
(exc. VAT)
kr 10 517,51
(inc. VAT)
Units
Per unit
1 +
kr 8 414,01
Related Products
The Atlas SCR will identify the device type, ...
Description:
The Atlas SCR will identify the device type, display the pinout and measure gate sensitivity. Connect any way round. Thyristor and Triac identification. Automatic pinout identification. Gate sensitivity checking from 100uA to 90mALoad current test up to 100mAShorted junction testing. ...
NEW Large OLED Display. Displays resistance mantissa and ...
Description:
NEW Large OLED Display. Displays resistance mantissa and exponent, temperature, relative humidity and test voltageNEW Internal Memory. Stores and recalls up to 100 measurements. Captures resistance, temperature, humidity and test voltage.NEW Measurement Stability Modes. Sets the 15-second electrification period ...
Easy to use wristband tester. Designed to check ...
Description:
Easy to use wristband tester. Designed to check that the wristband is working and is in good contact with the wearers skin. Checks between 750kΩ to 35MΩTerminals: 10mm stud, 4mm banana and post for croc clip. Audible noise on pass. ...
Verifies proper AC Outlet Wiring and ground path ...
Description:
Verifies proper AC Outlet Wiring and ground path integrity, enabling effectiveness of grounding products. Internal audit tool; tests to practical resistance limits. Convenient, easy to use; tests wrist strap at lab or workstationUK Plug.