RS Components
Our website uses cookies and similar technologies to provide you with a better service while searching or placing an order, for analytical purposes and to personalise our advertising to you.
 
MPN

E10 Indicator Light, Clear, 12 V, 250 mA, 3000h


2030 In stock for delivery within 1 working days
Add to Basket

Price Each (In a Pack of 10)

kr 8,155

(exc. VAT)

kr 10,194

(inc. VAT)

Units

Added

RS Stock No.:
104-862
Brand:
RS PRO
COO (Country of Origin):
KR
UnitsPer unitPer Pack*
10 - 240kr 8,155kr 81,55
250 - 990kr 6,882kr 68,82
1000 - 4990kr 5,628kr 56,28
5000 - 9990kr 4,356kr 43,56
10000 +kr 3,104kr 31,04
*price indicative

T-3 (10mm) Tubular MES


"Filament lamps will perform to specification and give optimum life when:
a) They are powered at the rated voltage from a stabilised 50 Hz AC supply.
b) Ambient temperature is in the range 20°C to 25°C.
c) No mechanical vibration is present.
Deviations from these criteria have a significant effect on lamp life, particularly with low current filaments (<80mA).
Power from a DC supply at the rated voltage can reduce the listed life by up to 50%.
The effect of deviation from the rated operating voltage should be noted:
5% above will reduce lamp life by up to 50%.
5% below will significantly increase lamp life.
Power consumption may vary up to ±10% compared to the listed values at the rated supply voltage. Therefore, particular care should be taken when a number of lamps are connected in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps."


Screw (LES, MES, SES)

Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.

Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).

Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.

Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.

AttributeValue
Voltage Rating12 V
Lamp BaseE10
Current Rating250 mA
Diameter10mm
Lamp SizeT3 1/4
Length28 mm
Lens ColourClear
Luminosity12.5 lm
Life Hours3000h