NXP 74HCT74D,652 Dual D Type Flip Flop IC, 4.5 → 5.5 V, 14-Pin SOIC

  • RS Stock No. 483-7878
  • Mfr. Part No. 74HCT74D,652
  • Brand Nexperia
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The 74HC74 and 74HCT74 are dual positive edge triggered D-type flip-flop. They have individual data (nD), clock (nCP), set (nSD) and reset (nRD) inputs, and complementary nQ and nQ outputs. Data at the nD-input, that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition, is stored in the flip-flop and appears at the nQ output. Schmitt-trigger action in the clock input, makes the circuit highly tolerant to slower clock rise and fall times.

Mixed 5 V and 3.3 V applications
Improved signal integrity with integrated termination resistors
High noise immunity
Flow through pin out for easy layout
Wide supply voltage range
Low propagation delay
Overvoltage tolerant input options
Integrated source termination resistor options
Bus hold options
Key applications
Frequency division
Controlled delays
Interface between asynchronous and synchronous systems

74HCT Family

Specifications
Attribute Value
Logic Family HCT
Logic Function D Type
Input Type Single Ended
Output Signal Type Differential
Triggering Type Positive Edge
Polarity Inverting, Non-Inverting
Mounting Type Surface Mount
Package Type SOIC
Pin Count 14
Set/Reset Yes
Number of Elements per Chip 2
Maximum Propagation Delay Time @ Maximum CL 53 ns@ 4.5 V
Dimensions 8.75 x 4 x 1.45mm
Minimum Operating Temperature -40 °C
Propagation Delay Test Condition 50pF
Minimum Operating Supply Voltage 4.5 V
Width 4mm
Maximum Operating Supply Voltage 5.5 V
Length 8.75mm
Maximum Operating Temperature +125 °C
Height 1.45mm
Available to back order for despatch 24.08.2020
Price Each (In a Pack of 20)
kr 2,722
(exc. VAT)
kr 3,402
(inc. VAT)
Units
Per unit
Per Pack*
20 - 20
kr 2,722
kr 54,44
40 - 80
kr 1,73
kr 34,60
100 - 180
kr 1,072
kr 21,44
200 - 380
kr 1,047
kr 20,94
400 +
kr 1,032
kr 20,64
*price indicative
Packaging Options:
Related Products
The HEF4013B is a dual D-type flip-flop that ...
Description:
The HEF4013B is a dual D-type flip-flop that features independent set-direct input (SD), clear-direct input (CD), clock input (CP) and outputs (Q, Q). Data is accepted when CP is LOW and is transferred to the output on the positive-going edge ...
The 74HC245, 74HCT245 is an 8-bit transceiver with ...
Description:
The 74HC245, 74HCT245 is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This ...
Industry-standard Advanced Ultra-low Power (AUP) logic family products ...
Description:
Industry-standard Advanced Ultra-low Power (AUP) logic family products for ultra-low power consumption, small footprint logic solutions for use in 1.8 V and mixed 1.8 V / 3.3 V circuit applications. The AUP logic family offers the following features:. Wide supply ...
Dual inverter, The 74HC2G04, 74HCT2G04 is a high-speed ...
Description:
Dual inverter, The 74HC2G04, 74HCT2G04 is a high-speed Si-gate CMOS device. The 74HC2G04, 74HCT2G04 provides two inverting buffers. Mixed 5 V and 3.3 V applications. Improved current drive and voltage level of signals. Improved signal integrity for complex layouts. Wide ...