Adafruit 2454, DPI TFT Kippah Interface Board for Raspberry Pi

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Adafruit DPI TFT Kippah for Raspberry Pi

This Adafruit DPI Kippah has a TFT panel which is connected to a Raspberry Pi without the use of on HDMI decoder. With a little software configuration, what normally would go out the HDMI port, now will come up on a nice little flat screen.

What is it compatible with?

Raspberry Pi B+, A+, Pi 2, Pi 3 or Zero

A little bit about the screen

This Kippah has not got a touch screen, however, you will get a sleek ultra-fast 18-bit colour display with optional touch support. When tested the results showed that this can be used with 5’’and 7’’ displays at 800x480. Kippah screen is what is called ’native’. What does that mean? It means that it gets all the graphics acceleration capabilities as well as immediate refresh which you would normally get from an HDMI display.

What is the advantage of Kippah?

This add on board uses almost every pin available on the Raspberry Pi. Pins are hardcoded, so they cannot be moved or rearranged. UART RX/TX pins (no console cable) and standard user I2Cpins are not included. Same as the EEPROM I2C pins, or hardware SPI pins.
Pins used:
• GPIO 2 through 21 inclusive
• #22, #23, #24, #25, #26 and #27
• USB port
Display replaces the HDMI/NTSC output, therefore DPI HAT and HDMI won’t be working simultaneously and you won’t be able to switch between the two.

Specifications:

This single-display module is suitable for use in Multimedia Player products. The LCD adopts one backlight with High brightness 12-lamps white LED.

LCD:
• Amorphous-TFT 5.0 inch display, transmissive, normally white type
• 800(RGB) x 480 dots Matrix
• Narrow-contact ledge technique
• LCD Driver IC: HX8264D x1 & HX8664B x1
• RGB interface
• Video signal interface: Parallel RGB or serial

Not included: TFT display, USB micro-B cable, FPC Extension cable, bent wire stand and Raspberry Pi.

Specifications
Attribute Value
Kit Classification Interface Board
For Use With Raspberry Pi
Kit Name DPI TFT Kippah
12 In stock for delivery within 1 working days
Price Each
kr 122,31
(exc. VAT)
kr 152,89
(inc. VAT)
Units
Per unit
1 +
kr 122,31
Related Products
Evaluation Board for the AD9398; HDMI™ Display Interface. ...
Description:
Evaluation Board for the AD9398; HDMI™ Display Interface. Supports high bandwidth digital content protection (HDCP)RGB to YCb. Cr 2-way colour conversion. Digital video interface, HDMI 1.1, DVI 1.0Digital audio interface, HDMI 1.1-compatible, SPDIF digital audio output, Multi-channel I²S audio output ...
The EA 9780-2USB USB test board for Windows ...
Description:
The EA 9780-2USB USB test board for Windows PCs supports the EA DOG series of monochrome text and graphics LCD modules from Electronic Assembly. When the EA 9780-2USB test board is connected to an EA DOG LCD module (such as ...
This range is a plug in accessories for ...
Description:
This range is a plug in accessories for the VM800P Plus module, which have various functionalities for the VM800P. The VA800A-SPI, VI800A-TTLU, VI800A-232U, VI800A-N485U, VI800A-RELAY, VI800A-ETH and VI800A-POE are all part of FTDI’s new Graphics Display Development Kits. These modules ...
This range is a plug in accessories for ...
Description:
This range is a plug in accessories for the VM800P Plus module, which have various functionalities for the VM800P. The VA800A-SPI, VI800A-TTLU, VI800A-232U, VI800A-N485U, VI800A-RELAY, VI800A-ETH and VI800A-POE are all part of FTDI’s new Graphics Display Development Kits. These modules ...