ETA Busbar, 24V dc, 500mm Pitch

  • RS Stock No. 723-4865
  • Mfr. Part No. X222.005.03 SIGNAL BUSBAR GREY (PACK OF 10)
  • Brand ETA
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

ESX10-T Electronic Circuit Protectors

Electronic circuit protector type ESX10-T is designed to ensure selective disconnection of DC24V load systems. By active current limitation, ESX10-T responds much faster to overload or short circuit conditions than switch-mode power supply. The ESX10-T limits the highest possible current to 1.3 to 1.8 times the selected rated current of the circuit protector. It is therefore possible to switch on capacitive loads of up to 20,000μF, but they are disconnected only in the event of an overload or short circuit.

Selective load protection, electronic trip characteristics
Reliable overload disconnection with 1.1 x lN plus, even with long load lines or small cable cross sections
Manual ON/OFF button (S1)
Status and failure indication through LED, status output SF or Si contact F
Integral fail-safe element adjusted to current rating
Can be snapped onto symmetrical rails for ease of installation and space-saving in control cabinets
Ease of wiring through busbar LINE+ and 0 V as well as signal bars and bridges

Approvals

UL, CSA

Approvals

UL, CSA

11 In stock for delivery within 1 working days
Price Each
kr 405,62
(exc. VAT)
kr 507,02
(inc. VAT)
Units
Per unit
1 - 9
kr 405,62
10 - 24
kr 381,13
25 - 49
kr 362,87
50 - 99
kr 352,34
100 +
kr 342,30
Related Products
The Molex m. Pm field attachable DIN solenoid ...
Description:
The Molex m. Pm field attachable DIN solenoid valve connector comes with improved strain relief. The cable retention force is increased up to 20% over internal nut style. It is a Form A, PG09 internal thread, 2-pole plus ground with ...
m. Pm DIN Valve Connector, Form A, External ...
Description:
m. Pm DIN Valve Connector, Form A, External Threads, 2 Pole Plus Ground with C4 Circuit, 24V, Red LED, Nitrile Gasket, Bulk Pack, Mounted.
A large variety of connector options, to cover ...
Description:
A large variety of connector options, to cover the majority of board-to-board, bussing and programming requirements. Designed for use with square or round 0.635mm pins with 2.54mm pitch. Intergral handle allows for easy insertion and removal.
These Open Top 2.54 mm pitch Jumper Sockets ...
Description:
These Open Top 2.54 mm pitch Jumper Sockets (Shunts) from Harwin are suitable for use with the M20 range of Pin Headers, see stock number 745-7040 typical or for SMT 681-2880 typical or for Snappable 547-3166 typical. The Open Top ...