NXP LPC4330FET100,551, 32bit ARM Cortex M4 MCU, 204MHz ROMLess, 100-Pin TFBGA

  • RS Stock No. 791-8208
  • Mfr. Part No. LPC4330FET100,551
  • Brand NXP
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

ARM Cortex-M4 Microcontrollers, NXP

Next-generation 32-bit ARM Cortex-M4 based microcontrollers for embedded applications, offering system enhancements including low power consumption, enhanced debug features, and a high level of support-block integration. The ARM Cortex-M4 CPU incorporates a 3-stage pipeline and uses a Harvard architecture as well as a third bus for peripherals, and includes an internal pre-fetch unit that supports speculative branching.
Single-cycle digital signal processing and SIMD instructions are supported, and a hardware floating-point processor is integrated in the ARM Cortex-M4 core.

ARM Cortex-M0 coprocessor
Operation at CPU frequencies of up to 204 MHz
Up to 264 kB of SRAM
Advanced configurable peripherals including state-configurable timer (SCT) and SGPIO I/F, two High-speed USB controllers, Ethernet, LCD, external memory controller plus multiple digital and analog peripherals

Note

NXP is a trademark of NXP B.V.

ARM Cortex Microcontrollers, NXP

Specifications
Attribute Value
Family Name LPC43
Package Type TFBGA
Mounting Type Surface Mount
Pin Count 100
Device Core ARM Cortex M4
Data Bus Width 32bit
Maximum Frequency 204MHz
RAM Size 264 kB
USB Channels 1 x Device, 1 x Host, 1 x OTG
Number of PWM Units 1
ADC Channels 8
Number of SPI Channels 4
Typical Operating Supply Voltage 3.3 V
Dimensions 9.1 x 9.1 x 0.8mm
Length 9.1mm
Pulse Width Modulation 1 (Motor control)
Number of UART Channels 1
Maximum Operating Temperature +85 °C
Number of Timers 4
ADC Resolution 10bit
Number of Ethernet Channels 1
Height 0.8mm
Number of I2C Channels 2
Maximum Number of Ethernet Channels 1
Instruction Set Architecture RISC
Number of CAN Channels 2
Timers 4 x 32 bit
Minimum Operating Temperature -40 °C
Timer Resolution 32bit
Number of ADC Units 1
Number of USART Channels 3
ADCs 1 (8 x 10 bit)
Width 9.1mm
Program Memory Type ROMLess
Discontinued product
Related Products
Pin-peripheral and software-compatible with other Kinetis MCUs and ...
Description:
Pin-peripheral and software-compatible with other Kinetis MCUs and provides designers with an analogue measurement engine consisting of integrated operational and transimpedance amplifiers and high-resolution ADC and DAC modules. This family also features IEEE® 1588 Ethernet and hardware encryption, full-speed USB ...
The Kinetis K7x MCU family includes 512KB-1MB of ...
Description:
The Kinetis K7x MCU family includes 512KB-1MB of flash memory, a single precision floating point unit, graphic LCD controller, IEEE® 1588 Ethernet, full- and high-speed USB 2.0 On-The-Go with device charge detect, hardware encryption, tamper detection capabilities and a NAND ...
The NXP ARM Cortex-M3 based microcontrollers for embedded ...
Description:
The NXP ARM Cortex-M3 based microcontrollers for embedded applications feature a high level of integration and offer system enhancements such as lower power consumption, enhanced debug features and a higher level of support-block integration. Cortex-M3 core operating at up to ...
The STM32 F401 series ARM® Cortex™-M4 based MCU ...
Description:
The STM32 F401 series ARM® Cortex™-M4 based MCU with Digital signal processing and floating point unit (FPU) featuring peripherals such as ADCs, 16-bit timers as well as communication interfaces; USART, SPI, I2C, I2S and audio PLL. STM32F401 Dynamic Efficiency™ microcontroller ...