Texas Instruments CC2630F128RGZT, 16bit ARM Cortex M0, ARM Cortex M3 Microcontroller, CC26xx, 48MHz, 128 kB Flash,
- RS Stock No.:
- 908-3811
- Mfr. Part No.:
- CC2630F128RGZT
- Brand:
- Texas Instruments
Discontinued product
- RS Stock No.:
- 908-3811
- Mfr. Part No.:
- CC2630F128RGZT
- Brand:
- Texas Instruments
Technical Reference
Legislation and Compliance
Product Details
CC2630 series 2.4GHz RF System-on-Chip
The SimpleLink™ CC2630 is a Cortex-M3/M0 based wireless System-On-Chip designed for 2.4GHz IEEE 802.15.4, ZigBee and 6LoWPAN wireless protocol applications. The CC26xx can function either as a Wireless Network Processor (a device running the wireless protocol stack, with the application running on a separate MCU), or as a stand-alone SoC. The ROM provides pre-programmed embedded TI RTOS kernel, Driverlib and lower-layer protocol stack firmware (802.15.4 MAC). It also contains a bootloader that can be used to reprogram the device using SPI or UART.
The CC2630 is ideal for battery powered and energy harvesting end nodes in ZigBee/6LoWPAN networks.
IEEE 802.15.4 Compliant RF Transceiver SoC
48MHz ARM Cortex-M3 core MCU with ROM, 128KB Flash memory, 20KB SRAM, 8KB Cache RAM
ARM Cortex-M0 core RF low-level controller with ROM, 4KB RAM
RF Frequency range: 2.4GHz ISM band
RF Output Power: up to +5dBm
Receiver Sensitivity: -100dBm @ 250kbps with DSSS, 1% PER
Modulation: O-QPSK
OTA data rate: 250kbps
AES-128 security module
True Random Number Generator (TRNG)
Sensor controller engine
8 channel 12-Bit ADC, 200ksps
Real-Time Clock (RTC)
Battery Monitor and Temperature Sensor
Support for 8 x capacitive sensing touchpads
Serial communication: 2 x SSI, UART, I²C, MicroWire, TI, I²S
Up to 31 x GPIO pins
Various low-power operation modes
Power supply: +1.8V to +3.8Vdc
Operating temperature range: -40 to +85°C
Applications: ZigBee Systems, 6LoWPAN systems, Home & Building Automation, Lighting Systems , Smart Grid, Wireless sensor networks, local communication for the Internet of Things (IoT)
RS Product Codes
908-3811 CC2630F128RGZT
48MHz ARM Cortex-M3 core MCU with ROM, 128KB Flash memory, 20KB SRAM, 8KB Cache RAM
ARM Cortex-M0 core RF low-level controller with ROM, 4KB RAM
RF Frequency range: 2.4GHz ISM band
RF Output Power: up to +5dBm
Receiver Sensitivity: -100dBm @ 250kbps with DSSS, 1% PER
Modulation: O-QPSK
OTA data rate: 250kbps
AES-128 security module
True Random Number Generator (TRNG)
Sensor controller engine
8 channel 12-Bit ADC, 200ksps
Real-Time Clock (RTC)
Battery Monitor and Temperature Sensor
Support for 8 x capacitive sensing touchpads
Serial communication: 2 x SSI, UART, I²C, MicroWire, TI, I²S
Up to 31 x GPIO pins
Various low-power operation modes
Power supply: +1.8V to +3.8Vdc
Operating temperature range: -40 to +85°C
Applications: ZigBee Systems, 6LoWPAN systems, Home & Building Automation, Lighting Systems , Smart Grid, Wireless sensor networks, local communication for the Internet of Things (IoT)
RS Product Codes
908-3811 CC2630F128RGZT
Approvals
ETSI, FCC, ARIB
Specifications
Attribute | Value |
---|---|
Family Name | CC26xx |
Package Type | VQFN |
Mounting Type | Surface Mount |
Pin Count | 48 |
Device Core | ARM Cortex M0, ARM Cortex M3 |
Data Bus Width | 16bit |
Program Memory Size | 128 kB |
Maximum Frequency | 48MHz |
RAM Size | 20 kB |
Typical Operating Supply Voltage | 3.8 (Maximum) V |
Dimensions | 4.15 x 4.15 x 0.95mm |
Data Rate | 250kbps |
Width | 4.15mm |
Height | 0.95mm |
ADCs | 1 (8 x 12 bit) |
Length | 4.15mm |
Maximum Operating Temperature | +85 °C |
Number of ADC Units | 1 |
Instruction Set Architecture | ARM |
Program Memory Type | Flash |
Minimum Operating Temperature | -40 °C |
- RS Stock No.:
- 908-3811
- Mfr. Part No.:
- CC2630F128RGZT
- Brand:
- Texas Instruments