Eaton 4 A Motor Controller, 24 V@ 50/60 Hz, Maximum of +55 °C

  • RS Stock No. 866-1388
  • Mfr. Part No. XTSC004BBT
  • Brand Eaton
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Eaton XT IEC Open Non-Reversing Manual Motor Controllers

The XT IEC manual motor controllers from Eaton combine a manual motor protector with an IEC contactor to provide complete motor protection. The open non-reversing controllers combine thermal overload protection, a motor disconnect function, magnetic short circuit protection and remote control operation in one compact, assembled unit.

Controllers cover motors with FLA ratings 0.10 A to 63 A
On / off rotary handle with lockout provision
Built-In Heater and Magnetic Trip Elements to Protect the Motor
Wide Range of Coils — 120 VAC, 24 VAC, 24 VDC

Eaton XTSC Series

Specifications
Attribute Value
Supply Voltage 24 V@ 50/60 Hz
Current Rating 4 A
Overall Length 45mm
Overall Width 178.5mm
Overall Depth 95.7mm
Maximum Operating Temperature +55°C
Discontinued product
Related Products
The PCU D10 display and control panel connects ...
Description:
The PCU D10 display and control panel connects by two wires to the APM110E as a remote display repeater and programming module. Supply voltage 10 Vdc from APM110EAnalogue output 4-20mA16 LEDs for indicate the unitIP54 protection. PanelmountingCut out 68x68 mm. ...
ST5-Si and ST10-Si programmable step drives offer the ...
Description:
ST5-Si and ST10-Si programmable step drives offer the following features:. Software setup using ST Configurator (software included)Microstepping 200 to 58000 steps/rev.Pulse and direction: pulse/direction, CW/CCW, A/B quadrature. Host control mode. Idle current reduction. Anti-resonance. Torque ripple smoothing. ...
ST5-S and ST10-S step drives offer the following ...
Description:
ST5-S and ST10-S step drives offer the following features:. Pulse and directionCW/CCW pulseA/B quadrature. Analogue velocity (oscillator) mode. Host commands (SCL compatible)Si. Net hub (HUB 444, stock no. 455-867) compatibleST Configurator software for setup (software included).
Drives motors up to 40V at 3.5AAdjustable drive ...
Description:
Drives motors up to 40V at 3.5AAdjustable drive current settings from 0.5 to 3.5AOutput overload protection. Synchronisation output for multi-axis systems. Full and half step drive modesTTL & CMOS compatible control interface. Output disable input5 & 12Vdc auxiliary outputs for ...