Fluke Test Probe, 12mm Tip, 1kV, 10A

Brought to you by Fluke, a range of Test leads and probes, suitable exclusively for Fluke Multimeters. Whether it's a test lead set or a probe set, dependent on the application, both types will add a sense of reliability to the intended application. All models are highly reliable and excellent quality.

• Both test leads and probes available
• Durable connection, which guarantees excellent results
• Single accessories and kits
• Different safety categories to suit the application
• Insulated wires

These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.

Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.

Want to take standard electrical measurements in hard-to-reach work areas? Send in these test probes from FLUKE. Their 12mm needle-shaped tips squeeze comfortably into tight spaces like recessed terminals and are also ideal for testing smaller components. Simply pop them on a pair of leads linked to a multimeter to begin taking readings such as voltage, current and temperature. Thanks to their CAT II 1000V safety rating, they hold their own against impulse voltages of up to 6000V. As the tips are made from durable stainless steel, these probes are built to last.

• 10A current rating for compatibility with powerful electrical setups
• Stainless steel tips resist rust for a long service life in humid work areas
• Moulded rubber design is easy to grip
• Connect to banana plugs for a swift and straightforward setup
• Sharp tips for precision contact

• Consumer electronics
• Manufacturing industry
• Medical technology
• Energy sector

These test probes fit onto FLUKE TL222 (449-9892) and TL224 (450-2358) leads.

’Buy a Fluke, Get one Free’ is back!!
Between March 1st, 2024 and August 31st, 2024, the customer spends €150 or more on a qualifying Fluke product (Fluke Industrial, Fluke Calibration, Fluke Networks, or Beha-Amprobe).
Customer claims their tool online at: www.fluke.com/en/freefluke
A proof of purchase in the form of a receipt or invoice is required.
Note: Offer not available in South Africa

CAT II 1000V